ISDN REQUESTED CIRCUIT NOT AVAILABLE

[mokhtar ACFE]

thanks Haroun ,
i have tow trunk in my pbx selta installation one Qsig and the second is in ISDN wich i try to manage it in order to route externel PCM R2 call . because as you know we coudl not trnsmit via qsig the installation number 02999 .
i will to try with bloc mode .

[haroun]

hi i have check with your colleague and it was that number of digit to send was zero change it to 29 and he was able to call selta users

[haroun]

no need to manager installation number at selta pbx , because it should be done by the oxe where pcmr2 trunk is connected to .
btw reverse ddi is not done at all on the oxe for selta why your 're getting this worng clip ?
the question is why ddi works for and reverse ddi didnot .
open new topic and post call trace form selta to PSTN using pcmr2 via oxe.
put isdn trace for qsig from selta to oxe and at sametime mfr2 signalling trace -use combined trace actdbg mfr=on isdn=on

[mokhtar ACFE]

htnaks ;
now i can call , the trunks are free . but when the call is established , I can not hear and the called does not hear me . just silence.
Can any one help me ?