Page 2 of 2
Re: SIP calls have long pause after last digit dialed
Posted: 29 Apr 2016 03:51
by fe80
the system is: R11.2-l2.300-20-e-ge-c0s1
lookars r all gives this output. It's unused, right?
Code: Select all
| 1) trk_grp = 3 dialing_table = 3
| nb_deleted_digits = 0 inserted_digits =
| vpnCostLimit = 0
| idx_atm = -1
|
| --> trk_grp 3 local TG name : external state : TOT_BUSY
| type : T2 variante : ISDN
| fais_suiv = -1 category = 31 nbjonc = 124
| vpnRate = 50 vpnCostLimit = 0
|
| ==> dialing_table 3
| command : I
| network : NETWORK0
| SIP gateway : 0
| Route usefull for : SPEECH FAX
| Protocole Type = DEPENDENT ON TG
| Route Type = Public
| NPD Id = 255
| Preempter = 0
| Trunk group source = ROUTE
Re: SIP calls have long pause after last digit dialed
Posted: 29 Apr 2016 06:45
by vad
If you dial some digits and have pause after dialling (in case of ARS):
1 - check ARS prefix - use ARS Prof. Trg Grp Seiz with overlap (overlap!!)
2 - in discriminator rules - declare number of digits exactly (not 255)
F.e. dial ARS prefix + 3000 (you want to call 3000 via SIP) - in discriminator rules for number started from 3 shall be declared number of digits 4
Re: SIP calls have long pause after last digit dialed
Posted: 29 Apr 2016 06:59
by cavagnaro
Yup, as usual VAD rules
that is what I was trying to suggest
Enviado de meu E6633 usando Tapatalk
Re: SIP calls have long pause after last digit dialed
Posted: 29 Apr 2016 10:20
by fe80
Hi @vad, declaring number length isn't possible because public numbers containing a variable count of 3 to 12 digits (f.e. 112 for emergency, 1234568 for a public call within same city, public call to an other city 030123456789). The only way to identify the end of dialing is to wait. This timeout the system waits by default seems to be 30s. The question is how to alter this timeout.
Re: SIP calls have long pause after last digit dialed
Posted: 29 Apr 2016 10:45
by cavagnaro
You can hit # to end as well
Enviado de meu E6633 usando Tapatalk
Re: SIP calls have long pause after last digit dialed
Posted: 29 Apr 2016 17:48
by murraya
or as per vad set rules in the numbering plan descriptor for your area. most of the digit lengths should be known with just a few at say 20 for unknown
Re: SIP calls have long pause after last digit dialed
Posted: 29 Apr 2016 18:18
by cavagnaro
Anyone remember the timer for that?
Enviado de meu E6633 usando Tapatalk
Re: SIP calls have long pause after last digit dialed
Posted: 02 May 2016 03:37
by fe80
ending with # works! This is a nice workaround, thanks!
Re: SIP calls have long pause after last digit dialed
Posted: 02 May 2016 04:08
by haroun
try to use number of digit to use under TG=30 (open dialing plan and discriminator=-1)
Re: SIP calls have long pause after last digit dialed
Posted: 02 May 2016 04:15
by vad
fe80 wrote:Hi @vad, declaring number length isn't possible because public numbers containing a variable count of 3 to 12 digits (f.e. 112 for emergency, 1234568 for a public call within same city, public call to an other city 030123456789). The only way to identify the end of dialing is to wait. This timeout the system waits by default seems to be 30s. The question is how to alter this timeout.
I know. In discriminator rules usually declared many string. In real life we need to create some rules - allowed/forbidden dialled numbers for users - emergency, local, long distant, international...
usually you cannot manage exactly only international calls. For emergency, local, mobile - not a problem to manage "number of digits" like
112 - 3
1 - 7
...
0 - 11
00 - 20 (for international we cannot declare number of digits and need to use "pause" or "end of dialing "#")