Alcatel Unleashed

looks like some thing wrong in xb011001 netadmin
ole and CPU positions:

Role of the CPU : MAIN

CPU position : 06 !!!!20

>>>>>>>CPU address : Not Declared????
compare the ps -edf in both cpu can help , or past the incidents when the cpu b is restarded
can you perform a double bascul?

looks like something changed in your network.
I would redo the net admin configuration from scratch.
what happens if you have CPUA MAIN up and running, and from CPUB (phone application not running) you run the mastercopy command?

It is not possible to use the bascul command when the servers are not visible.


(1101)xa011001> twin

Fri Oct 18 13:17:21 CEST 2024


Usage : twin [Redundancy Cpu Enable (y/n)]

Role and CPU positions:

Role of the CPU : MAIN

CPU position : 06

CPU address : 172.22.26.2

Twin CPU position : UNKNOWN

Twin CPU address : UNKNOWN

Redundancy State:

Duplicated configuration : YES

Wished sig. transfer mode : C1 signalling channel

Transmission CPU-CPU : KO

Telephony redundancy : KO

monitel redundancy : KO

memloader redundancy : KO

All applications redundancy : KO

(1101)xa011001> role -b
MAIN stand-by CPU state : NOT READY
(1101)xa011001> bascul

Fri Oct 18 13:17:30 CEST 2024


The Stand-By CPU is absent or not initialized. Command Unavailable.

-------------------------------------------------------------------------------------------

(1101)xb011001> bascul

Fri Oct 18 13:11:13 CEST 2024


The Stand-By CPU is absent or not initialized. Command Unavailable.

cpu position couldn't be same in redundancy case
one in position 6 the otherone in position 20 (a and b)
cpu b :
CPU position : 06------should be 20

CPU address : Not Declared the netadmin is not token in consideration