Alcatel Unleashed

I read the documentation and I do not find the problem!!!!
My virtual lab:

VMWare version: 6.0.3
------------------------------------------------------
Configuration vitual machine: custom
guest operation system: linux/ other linux 2.4.x kernel
networlk conection: use bridge networking
disk capacity: 8 GB
I have tried with and without: allocated all disk space now
------------------------------------------------------
Alcatel Pc installer 2.22
linux + call handing

Installation parametres
call server type: appilance server
call handling version: g1302
country: es (spain)
instalation type: standard
network type: company network
network interface: my network adapter 192.168.1.2
ip address: 192.168.1.3 (automatic)
ethernet address: mac address of virtual machine
-----------------------------------------------------

Welcome to Alcatel-Lucent e-Mediate installation

+------------------+ FTP Setup +------------------+
| |
| Please enter the following information: |
| |
| o the name or IP number of your FTP server |
| o the directory on that server containing |
| Red Hat Linux for your architecure |
| |
| FTP site name: ________________________ |
| Red Hat directory: ________________________ |
| |
| [ ] Use non-anonymous ftp or a proxy server |
| |
| +----+ +------+ |
| | Ok | | Back | |
| +----+ +------+ |
| |
| |
+-------------------------------------------------+

---------------------------------------------------------
In the virtual machine:
loaded 5005711 bytes (4888 kb) sucesfully
warning: undee_close () failed1
[linux-bzImage. setaup=0xa00, size=0x9b2c3]
[linux-intrd @ 0x7bcd000, 0x421a61 bytes]

Thanks all

I would try to create the virtual machine again, but with LSI logic SCSI adapter (choose custom configuration), and inPC Installer use Blade Server instead Appliance Server.
Regards.

what does the SCSI has to do with this?

It´s OK!!!!!!!

Finallly install a Tftp server Filezilla, and when the instalation it asks the server ftp,
I put the pc´s Ip address where I have the pc installer and in the filezilla server
we see the route that asks de instalation.
It is necessary to suppress tftp of pcinstaller, in the administrator of tasks!!!

uuufffffffffff, sorry with my English!!!

Hi all,

anyone tried vmware with g.1503 yet?
i got problem after i finish doing the whole installation from the beginning (file -> new -> virtual machine and with pc installer on).
i'm setting these parameters:

------------------------------------------------------
Alcatel Pc installer 2.23
linux + call handing

Installation parametres
call server type: appilance server
call handling version: g1503
country: ii (indonesia)
instalation type: standard
network type: company network
network interface: (my vmware1 adapter) 1.1.1.14
ip address: 1.1.1.15 (automatic)
ethernet address: mac address of virtual machine (shown when i start the new virtual server)
---------------------------------------------------

i can finish my installation and pc installer send pop up that installation is success.
but when i want to start the oxe vmware for the first time.
"GRUB Loading stage2. output on the serial line..
Uncompressing Linux... Ok, booting the kernel."
then it just stuck, nothing happen anymore.

i also have add serial device,
using named pipe: \\.\pipe\com_1
this end is the server
the other end is a virtual machine
and i do turn on yield cpu on poll too.

anyway should i use appilance server or blade server for call server type at pc installer?
i think i have try blade server but i never succeed on the pc installer with it.

please do advice
Thank's

Best Regards,
johnson

That is normal behave...have you read the tutorial?

oh..i see.
so how do i telnet or console to my vmWare sir?
Thank's

Please read the tutorial...

ok thx.

hi
can you tell me where is the tutorial?