Omnivista 4760 with SIP trunk to gsm gateway

[tot3nkopf]

Is the trunk group declared private?

[haroun]

as per 10.jpg the trunk group is not private
diaz are you sure that are codes are not overllaping between carrier ;some times omnivista can not calculate the coste (cost =0 even duration is not equal to zero) when the area code is shared between to carrier under city /country name , i have seen in my side

[haroun]

look same case
i know why because cost is equal to zero becaus same area code for tow different carrier

[haroun]

as ypu remark ars changes the dialled number and same area appears for two carrier
i add the new area with one additional digit 023 1 in the region of real carrier and with cost recalculation
cost is #0 and area name appears

[Zero]

Hi elias_ruiz_diaz,

Sorry Zero, what do you ask about the calculation mode?

This is to give idea on your inquiry, calculation mode (modo de cálculo) gives the following option:
- Duration: round down
- Duration: exact
- Duration: round up
- Cost given by the PCX
- Based on unit



Thanks,
Zero

[elias_ruiz_diaz]

Is the trunk group declared private?

no it's not declared, it must to be?

[elias_ruiz_diaz]

as ypu remark ars changes the dialled number and same area appears for two carrier
i add the new area with one additional digit 023 1 in the region of real carrier and with cost recalculation
cost is #0 and area name appears

in the first two screenshots (that you upload) it doesn't cost the call, but in the second two, they work.. what did you change? I didn't undestand that part..

Thanks!

[elias_ruiz_diaz]

Hi elias_ruiz_diaz,

Sorry Zero, what do you ask about the calculation mode?

This is to give idea on your inquiry, calculation mode (modo de cálculo) gives the following option:
- Duration: round down
- Duration: exact
- Duration: round up
- Cost given by the PCX
- Based on unit



Thanks,
Zero

my calculation mode is "Duration: exact" I also tried with "Duration: round up"

[joao.carlos]

Can you post NMC_CostCalculation.log ? Just the lines regarding the number that the cost =0

[elias_ruiz_diaz]

Can you post NMC_CostCalculation.log ? Just the lines regarding the number that the cost =0

I only have "NMC_CostRecalculation_1.log" I didn't find "NMC_CostCalculation.log"