Page 3 of 3
Re: Install R100.1 in vmware or virtualbox
Posted: 05 Oct 2023 21:33
by Skoh_utec
haroun wrote: ↑05 Oct 2023 21:15
can u type any command ike netadmin
Yes, seems netadmin is able to run.
ifconfig is NG.
4.JPG
Re: Install R100.1 in vmware or virtualbox
Posted: 05 Oct 2023 21:34
by Skoh_utec
oldboy wrote: ↑05 Oct 2023 21:31Try 5.6
Thank you let me try.
Re: Install R100.1 in vmware or virtualbox
Posted: 06 Oct 2023 00:08
by Skoh_utec
oldboy wrote: ↑05 Oct 2023 21:31Try 5.6
Sorry, my mistake. Actually using ver5.6 now.
Re: Install R100.1 in vmware or virtualbox
Posted: 06 Oct 2023 00:20
by Skoh_utec
oldboy wrote: ↑05 Oct 2023 21:20
In the syslog it is complaining re dhcp lease no free addresses which is strange, the linux looks fine.
Have you tried just the base instead of the full version ?
Yes, tried base installation but had same issue.
5.JPG
Re: Install R100.1 in vmware or virtualbox
Posted: 06 Oct 2023 11:47
by haroun
Skoh_utec wrote: ↑05 Oct 2023 21:33
haroun wrote: ↑05 Oct 2023 21:15
can u type any command ike netadmin
Yes, seems netadmin is able to run.
ifconfig is NG.
4.JPG
after installing the static release from that make the necessary change for machine name (netadmin-m)and reboot
swinst and check and install the patch and delivries
cuze i got same message at pc installer with cpu 6 but was surprised that linux + swinst + tel were good and i continued the with patches installations as usual . system is runing now and with no errors or incident