Page 1 of 2
Commande for listing all trunk group in system
Posted: 28 Dec 2009 09:28
by belkhiati
Hi
Is there any one know the command to list all trunk group associating the N° of trunk , N° of Cpl,N° Board . I know the command list_faisc that associate the number of trunk , node ,the Pfx …. ) But not the N° of Cpl and N°Board .
Thanks and best regards
Posted: 28 Dec 2009 10:29
by jasic
I used first list_faisc and then i've a look to the trunk itself with the command trkvisu xx xx = trunkgroup
Posted: 28 Dec 2009 12:24
by swinstation
try trkvisu all
Posted: 28 Dec 2009 13:10
by OXE_4400
Not exactly what You want:
trkvisu all
Posted: 28 Dec 2009 13:52
by chicane717
You could try trkvisu <trunk group ID>, for each trunk group on the system.
Sample:
xa000002>trkvisu 15
This command will return all the physical equipment (shelf, board, access, equipment) associated to the trunk group ID 15.
Posted: 29 Dec 2009 02:12
by belkhiati
thank you very much , this is just what I was looking for
Posted: 29 Dec 2009 13:07
by enio.eltz
Hi
Try trkstat -r <act> <cpl> . -r is refresh. Maybe it isn't you want.
Best regards.
Posted: 30 Dec 2009 07:28
by subva01
Hi ,
I am looking for command which displays the calls of T2-IP trunk group ,like Sipdump for Sip TG
Thanks and regards
Posted: 01 Jan 2010 11:31
by frank
Subva01:
motortrace 2
traced
is this what you want ?
Posted: 07 Jan 2010 00:01
by subva01
I am looking for , no of calls active / inactive in a trunk group and on a specific trunk.
Trunk usage and Trunk Group usage
Is ther any command in OXE which can give this stats.
Thanks