Page 1 of 1

Omnipcx -> Sip -> Asterisk -> IAXmodem -> Hylafax

Posted: 05 Jan 2010 03:28
by mopo
Hi Guys,
Has anyone had experience with getting this combination working, i noticed a couple of posts in the old forums from people who had.

I have the call answering but i'm not getting any fax's through due to what hylafax says is "Failure to receive silence (synchronization failure)."
The IAX2modem log's have a lot of messages saying '[2010-01-05 16:08:55] IAX2 jitter - last_ts: 6047, ts: 6077'

Both the omnipcx and hylafax machine are on the same gigabit cisco switch.

I am using G711_20 for my codec in my ARS table.

Any help would be great.
Thanks
P

Posted: 13 Jan 2010 21:47
by Nigel Rennie
I am looking to setup a SIP trunk between OXE and Asterisk.

I am getting an error "Trunk Group Id : no more fictif trunk id free".

Now I assume that I am running into licensing problems. Does anyone know where I can get a reference on the licensing model?

Cheers
Nige

Posted: 14 Jan 2010 06:17
by Ralonso
Hi
Go to /usr3/mao and run the command "cfgUpdate",
Increases the maximum of trunks, resets the oxe, this solves the problem of "no more ...."

Regards
Raul