Page 1 of 1
SBC (session border controller)
Posted: 07 Jan 2010 05:42
by MALEw
Hi guys,
has anyone experience with setup SBC ? I configured from documentation, but isn't working.
My scheme as follows - LAN - there is OXE and eth1 from SBC, DMZ - there is eth0 from sbc. In DMZ is CISCO ASA. I can ping from eth1 to outside (e.g. google, yahoo etc). When i started X-Lite, so I can not registration to OXE from outside.
Can you help me ?
thanks
Posted: 07 Jan 2010 20:43
by cavagnaro
logs?
Posted: 08 Jan 2010 10:32
by MALEw
I don't know which log. Here is logs from ALGSip and ALGNoe
Open file: 20091216-163810_ALGSIP_TRACE-start.log
Use Ctrl+C to exit
[MP0] 127.0.0.1:22500
**** Media Proxies Sorted Association ****
reloadConfigurationCommandRequestPDU_chosen
DEBUG. ProxyConfiguration::loadInitFile: reading /etc/neotip/NeoALGSIP.ini
**** Interfaces ****
Interface: Intranet(Address) Attached address: 172.30.1.252 . VoIP address: 172.30.1.252
Name: Intranet
Device Name: eth0:0
Interface: Extranet(Address) Attached address: 10.70.147.22 . VoIP address: 10.70.147.22
Name: Extranet
Device Name: eth1:0
**** Media Proxies List ****
[MP0] 127.0.0.1:22500
**** Media Proxies Sorted Association ****
reloadConfigurationCommandRequestPDU_chosen
DEBUG. ProxyConfiguration::loadInitFile: reading /etc/neotip/NeoALGSIP.ini
**** Interfaces ****
Interface: Intranet(Address) Attached address: 172.30.1.252 . VoIP address: 172.30.1.252
Name: Intranet
Device Name: eth0:0
Interface: Extranet(Address) Attached address: 10.70.147.22 . VoIP address: 10.70.147.22
Name: Extranet
Device Name: eth1:0
**** Media Proxies List ****
[MP0] 127.0.0.1:22500
**** Media Proxies Sorted Association ****
reloadConfigurationCommandRequestPDU_chosen
DEBUG. ProxyConfiguration::loadInitFile: reading /etc/neotip/NeoALGSIP.ini
**** Interfaces ****
Interface: Intranet(Address) Attached address: 172.30.1.252 . VoIP address: 172.30.1.252
Name: Intranet
Device Name: eth0:0
Interface: Extranet(Address) Attached address: 10.70.147.22 . VoIP address: 10.70.147.22
Name: Extranet
Device Name: eth1:0
**** Media Proxies List ****
[MP0] 127.0.0.1:22500
**** Media Proxies Sorted Association ****
Open file: 20091216-163810_ALGSIP_TRACE-start.log
Use Ctrl+C to exit
[MP0] 127.0.0.1:22500
**** Media Proxies Sorted Association ****
reloadConfigurationCommandRequestPDU_chosen
DEBUG. ProxyConfiguration::loadInitFile: reading /etc/neotip/NeoALGSIP.ini
**** Interfaces ****
Interface: Intranet(Address) Attached address: 172.30.1.252 . VoIP address: 172.30.1.252
Name: Intranet
Device Name: eth0:0
Interface: Extranet(Address) Attached address: 10.70.147.22 . VoIP address: 10.70.147.22
Name: Extranet
Device Name: eth1:0
**** Media Proxies List ****
[MP0] 127.0.0.1:22500
**** Media Proxies Sorted Association ****
reloadConfigurationCommandRequestPDU_chosen
DEBUG. ProxyConfiguration::loadInitFile: reading /etc/neotip/NeoALGSIP.ini
Open file: 20091216-163810_ALGSIP_TRACE-start.log
Use Ctrl+C to exit
[MP0] 127.0.0.1:22500
**** Media Proxies Sorted Association ****
reloadConfigurationCommandRequestPDU_chosen
DEBUG. ProxyConfiguration::loadInitFile: reading /etc/neotip/NeoALGSIP.ini
**** Interfaces ****
Interface: Intranet(Address) Attached address: 172.30.1.252 . VoIP address: 172.30.1.252
Name: Intranet
Device Name: eth0:0
Interface: Extranet(Address) Attached address: 10.70.147.22 . VoIP address: 10.70.147.22
Name: Extranet
Device Name: eth1:0
**** Media Proxies List ****
[MP0] 127.0.0.1:22500
-------------------------------------------------------------------------------------------------------------------------------------------------------
Open file: 20091127-113225_ALGNOE_TRACE-start.log
Use Ctrl+C to exit
WARN. Tracer::init: DEPRECATED method. Please use it s sibling
WARN. Tracer::Tracer: DEPRECATED constructor.
WARNING. Number of calls specified in init file is to o high
Number of calls set to 0
WARNING. Number of calls specified in init file is nu ll
Number of calls set to 0
WARNING. You need to create an other interface
Posted: 09 Jan 2010 20:58
by frank
on the OXE:
su (enter password for root)
tcpdump -s 2000 -w sip.log
Once you are done with the logs, attach the file here.
Explain all the IP addresses too
Posted: 11 Jan 2010 04:46
by MALEw
So i did log from OXE, but this logs doesn't read in notepad.
Here is link for download (it doesn't work insert file here).
http://rapidshare.com/files/333575671/sip.log.html
Posted: 12 Jan 2010 00:03
by cavagnaro
No, it will not open with notepad, you captured the packets, use wireshark for example to open and analyze it.
Please detali the IP addresses and call flow for an easier analysis.
Posted: 12 Jan 2010 01:06
by frank
Hi ,
In the trace that you took, there is no SIP at all .. No registration, no nothing..
Posted: 12 Jan 2010 09:15
by MALEw
I opened SIP log in wireshark and there aren't IP from SBC. 172.28.1.13 is my IP through VPN and 10.152.144.7 is IP from OXE.
So problem is somewhere in config SBC. When i started X-Lite (from outside) together with wireshark, so i saw only request from X-Lite, but nothing from SBC, no answer. Remote system seems like death (bad configure obviously).
Posted: 09 Feb 2010 03:07
by MALEw
Hi guys,
so it already works. Problem was in configuration interface
I am solving connect My Teamwork and SBC now. Have you any experience ? I not found out any documentation (interworking).
Thanks for your help
Regards