Alcatel Unleashed

Hello experts,

I have an issue...at a site the standby cpu looses ping occasionally. Means to say if we ping stanby IP address on certain occasions it gives request time out and again starts giving proper reply. This goes on and on throughout the day. No issue with main cpu ip address and role address only issue with standby.
Have checked the cables, connections via RMA to cpu and nothing seems to be working out.
Please help.
R8.0.1-g1.503-c7s2
Thank You,
Wangdu

If both CPU connected to the switch - embedded (on-board) ethernet forbiden? (XF03 jumper)

Here only main cpu via brma box (E0) is connected to customer's LAN.
Below are the ethctl command results of main and standby for kind reference
Main:
(1)MAIN20> ethctl
Thresholds configuration :
broadcast frames : disabled.
total frames : disabled.
bandwidth : disabled.
scan interval : 500 (ms).

Embedded Ethernet configuration :
jumper : enabled.
xilinx : enabled.
-> state : enabled.

External Ethernet configuration :
link config : auto.
link state : 100Mb full.

Standby:
timout disabled.
(1)Stby6> ethctl
Thresholds configuration :
broadcast frames : disabled.
total frames : disabled.
bandwidth : disabled.
scan interval : 500 (ms).

Embedded Ethernet configuration :
jumper : enabled.
xilinx : enabled.
-> state : enabled.

External Ethernet configuration :
link config : auto.
link state : none.