Alcatel Unleashed

When i try installing the system, i get an error in Omnipcx installer "DHCP Lease time error"


Rogers

you must configure host-only in vmware

I get this error on my serial output "dhcpcd[29]: timed out waiting for a valid DHCP server response" and a popup message from PC installer 'DHCPD': Produced the following error message:Lease conflict at 192.168.222.2

I can't also modify the Ethernet Address on PC Installer - The box is disabled with a text "not needed"

Set up as Appliance Server. Then instead of cable connect set Company Network and then put the MAC you see on the VMWare screen when load. Once this is ok, restart your VMWare.

this problem is only in 6.2 installation , in the other installations has no problems like this

When y try to install the R8 with WMWARE, the guest fing a IP Address but y have an error "arp timeout".
How can i erase this error ?

meprinchard wrote:When y try to install the R8 with WMWARE, the guest fing a IP Address but y have an error "arp timeout".
How can i erase this error ?

Hello,
I'm new in this forum, I have the same problem with VMWARE, it can't find tftp server? but the dhcp is OK.
Where is the problem?

Thanks a lot for your help.
Bougy

Hi!!

Have you find a solution at your problem?

CharloOo72