Page 1 of 2
SIP trunk group
Posted: 28 Apr 2010 10:10
by alex.marete
Dear all,
I have recently purchase a license for 8 SIP trunks. OXE R9.0. Once I create a trunk group as per documentation i get the incident - no free hybrid bus access- i have modified the cfgUpdate but the results are the same.
Some idea?
Alex
Posted: 28 Apr 2010 23:44
by oldboy
Have you reset the PCX? Silly question i know but i thought i would ask it anyway
Posted: 29 Apr 2010 03:50
by alex.marete
Dear Oldboy,
I have done several resets and still the same.
Thanks
Posted: 29 Apr 2010 04:18
by vad
With cfgUpdate we can solve problem with "no more fictive trunks". But " no free hybrid bus access"?
Posted: 29 Apr 2010 07:45
by sadim
Hi,
How is the parameter Stand-alone seen by cfgupdate ?
If it is set to yes, try to change.
Best regards
Sadim
Posted: 29 Apr 2010 09:26
by tincho.rn
Hi. Check the following TC. Perhaps has something to do with your problem. Regards.
Posted: 29 Apr 2010 23:00
by vad
In another words - how many trunks was added?
Posted: 30 Apr 2010 04:50
by ifraembs
Hello,
i knowe the Problem.
First in Actis you need the flag for SIP Multimode. If you have this you can see in the PBX unter cd /usr3/mao more hardware.mao
the PARA_MAO 5 this must be 0.
Then you can check the cfgUpdate.
cfgUpdate check the Trunks it must be 1000. If not cange it.
Posted: 03 May 2010 04:05
by sadim
Hi ifraembs,
You have reach same conclusion then me since para_mao 5 correspondes to the stand-alone value under cfgupdate.
Regards
Sadim
Posted: 05 May 2010 16:17
by frank
alex.marete, did you fix your issue ?