Alcatel Unleashed

Hi Everyone,

im trying to build graphs in cacti for our 2 6400-24 switches. I get 24 + 2 (vlan and localhost) interfaces. Port #25 is up (SFP Port 1), but the data is shown as Traffic 1/1.

snmpwalk shows:

ifDescr.1001 = STRING: Alcatel-Lucent 1/1 6.3.3.277.R01
ifDescr.1002 = STRING: Alcatel-Lucent 1/2 6.3.3.277.R01
ifDescr.1003 = STRING: Alcatel-Lucent 1/3 6.3.3.277.R01
ifDescr.1004 = STRING: Alcatel-Lucent 1/4 6.3.3.277.R01
ifDescr.1005 = STRING: Alcatel-Lucent 1/5 6.3.3.277.R01
ifDescr.1006 = STRING: Alcatel-Lucent 1/6 6.3.3.277.R01
ifDescr.1007 = STRING: Alcatel-Lucent 1/7 6.3.3.277.R01
ifDescr.1008 = STRING: Alcatel-Lucent 1/8 6.3.3.277.R01
ifDescr.1009 = STRING: Alcatel-Lucent 1/9 6.3.3.277.R01
ifDescr.1010 = STRING: Alcatel-Lucent 1/10 6.3.3.277.R01
ifDescr.1011 = STRING: Alcatel-Lucent 1/11 6.3.3.277.R01
ifDescr.1012 = STRING: Alcatel-Lucent 1/12 6.3.3.277.R01
ifDescr.1013 = STRING: Alcatel-Lucent 1/13 6.3.3.277.R01
ifDescr.1014 = STRING: Alcatel-Lucent 1/14 6.3.3.277.R01
ifDescr.1015 = STRING: Alcatel-Lucent 1/15 6.3.3.277.R01
ifDescr.1016 = STRING: Alcatel-Lucent 1/16 6.3.3.277.R01
ifDescr.1017 = STRING: Alcatel-Lucent 1/17 6.3.3.277.R01
ifDescr.1018 = STRING: Alcatel-Lucent 1/18 6.3.3.277.R01
ifDescr.1019 = STRING: Alcatel-Lucent 1/19 6.3.3.277.R01
ifDescr.1020 = STRING: Alcatel-Lucent 1/20 6.3.3.277.R01
ifDescr.1021 = STRING: Alcatel-Lucent 1/21 6.3.3.277.R01
ifDescr.1022 = STRING: Alcatel-Lucent 1/22 6.3.3.277.R01
ifDescr.1023 = STRING: Alcatel-Lucent 1/23 6.3.3.277.R01
ifDescr.1024 = STRING: Alcatel-Lucent 1/24 6.3.3.277.R01
ifDescr.13600001 = STRING: vlan_1_name
ifDescr.13600154 = STRING: Loopback

How can I get the data for SFP ports 1-4 (Ports #25 to #28)?

Regards,

Dieter

hello

this is combo port 1/1-4 is combo port with fiber 1 2 3 4 .
this is the same for 6850.


Monitor port 25 = port 1

so if you have fiber link up on port 1 , monitor also port 1/1 you get in you snmpwalk

cedric

Hello

I want to configure my OS 6855 to work together with Cacti, Can anybody help me with the steps about the configuration ??

Thanks a lot