Page 1 of 1
7705 SAR upgrade
Posted: 24 Jun 2010 14:38
by franke
Hi,
I just received this 7705 SAR and I'm trying to upgrdae the software to 3.0
It will not get the primary image off my filezilla server
keeps erroring out
Is there away to ftp or tftp to the compact flash and
then I could just boot from local?
Thanks
Posted: 29 Jun 2010 05:17
by agungaryo
hi,
give the error detail which come out. . .
are you failed to boot ?
maybe,you may manually copy to compact flash via card reader . and don't forget to do same with csm b.
regard
agung aryo
Posted: 09 Jul 2010 12:23
by franke
I needed to add ID
echo "System Security Configuration"
#--------------------------------------------------
system
security
ftp-server
user "frank"
access console ftp snmp
then I was able to ftp image
Re: 7705 SAR upgrade
Posted: 06 Jun 2011 11:06
by Koekemgs
Hi!
I tried to upgrade firmware to R3 but was unsuccessful, now it doesn’t boot up correctly. I have tried to restore settings but it keeps giving me TiMOS image load failed. It keeps booting up into the page below.
HELP???????
Hit a key within 36 seconds to change boot parms...
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:
primary-image cf3:\
primary-config cf3:\config.cfg
autonegotiate
duplex full
speed 100
wait 3
persist off
console-speed 115200
Hit a key within 1 second to change boot parms...
Primary image location: cf3:\
Could not find TiMOS image at cf3:\
TiMOS image load failed.
Hit a key within 59 seconds to change boot parms...
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:
primary-image cf3:\
primary-config cf3:\config.cfg
autonegotiate
duplex full
speed 100
wait 3
persist off
console-speed 115200
Hit a key within 1 second to change boot parms...
Primary image location: cf3:\
Could not find TiMOS image at cf3:\
TiMOS image load failed.
Hit a key within 33 seconds to change boot parms...
Re: 7705 SAR upgrade
Posted: 07 Jun 2011 08:35
by agungaryo
it's caused you are failed to config "primary-image cf3:\"
choose one this solution :
1. when booting it'll appear "Hit a key within 1 second to change boot parms"
just hit and config primary-image with "cf3:/7705-TiMOS-3.0.R3" depend on what version that you had
it should boot corectly
2. open the CPM module, get CF card and use the ordinary card reader to read the CF
you will see file bof.cfg ,edit with notepad and
it should like this:
Code: Select all
primary-image cf3:/7705-TiMOS-3.0.R3
primary-config cf3:/config.cfg
persist on
autonegotiate
duplex full
speed 100
wait 3
the location "primary-image" is depend on the version what you had ,you can identify at folder TiMOS that's being in directory cf
if u had TiMOS-3.0.R3 then the folder 7705-TiMOS-3.0.R3 at cf3 should exist
Regard,
Re: 7705 SAR upgrade
Posted: 14 Jun 2011 15:20
by Koekemgs
Thanx Bud
I have restored settings and upgraded firmware to R3.
Greatly appreciated.
Regards
Gary