Page 1 of 1
Mirroring IP Phone
Posted: 20 Oct 2010 04:02
by dryhouse
Hi guys,
i have this problem in my IP touch 4038:
mirror set pc
#mirror#
pc port protection on, mirror deactivated
mirror KO
How I can activate the mirroring?
Gracias brothers.
Posted: 20 Oct 2010 04:24
by vad
May be - Alcatel 8&9 series/ Series 8&9 COS/ Phone COS - you have disabled PC port?
Posted: 20 Oct 2010 04:44
by ranlp
I think the correct command is "mirror set lan".
However in mgr we need to activate the PC port.
Alcatel 8&9 Series > Alcatel 8&9 classe of service > Phone COS
Set the State PC Port parameter to Enable Port.
Hope this helps.
Posted: 20 Oct 2010 06:02
by dryhouse
Thanks vad,
i have set in cascade not filt.Works OK
Best regards.
P.D: Thanks ranlp
Re: Mirroring IP Phone
Posted: 26 Apr 2011 18:52
by jorgehi
Hi;
I´ve got the same problem, i have modify the Phone Cos.
After that
NoePhone > mirror set lan
mirror set lan
#mirror#
pc port protection on, mirror deactivated
mirror KO
if i check the pcport;
NoePhone > pcport
pcport
#pcport#
Current pc port protection: voice vlan filtering
After next reset: voice vlan filtering
pcport OK
NoePhone >
And in another phone this is that appears,
NoePhone > pcport
pcport
#pcport#
Current pc port protection: off
After next reset: off
pcport OK
NoePhone >
did you knoe how to disable the protection?
Regards
Re:
Posted: 26 May 2011 03:02
by dryhouse
ranlp wrote:I think the correct command is "mirror set lan".
However in mgr we need to activate the PC port.
Alcatel 8&9 Series > Alcatel 8&9 classe of service > Phone COS
Set the State PC Port parameter to Enable Port.
Hope this helps.
saludos
Re: Mirroring IP Phone
Posted: 24 Jul 2013 03:34
by ACNoob
Hi jorgehi,
Did you check that the Phone COS is the same as the one you changed in "Alcatel 8&9 Series > Alcatel 8&9 classe of service > Phone COS"? I had that happen to me, I changed Phone COS 0, but my ext was using Phone COS 2....
Regards
AC