Page 1 of 1
.wav file transfer for Dynamic voice guide
Posted: 25 Oct 2010 08:27
by OXE_4400
Everything OK with Dynamic voice guide recorded by 4035 set, file stored in /usr7/vg/dhs/ directory.
How to replace with .wav file transferred by ftp from PC?
File format (GPA2 case) correct - 8 bit, 8kHz, mono CCITT alaw.
I am trying to select it but OXE doesn't accept.
Posted: 25 Oct 2010 11:34
by smileyman
Is this a file from Alcatel Audio Station (AAS)?
Best regards
smileyman
Posted: 25 Oct 2010 12:01
by OXE_4400
I have AAS. Tried with it, no clear idea. Exist some meniu for copying in AAS, can anybody to describe strict procedure.
Recorded by 4035 file contains comments at the end. Also exist somewhere in OXE link to recorded file.
Actually file is from flash file for SUVG flash image.
Posted: 25 Oct 2010 12:30
by Turlupin
Hi,
You should try with a 8khz 16 bits Mono wav file
Turlupin
Posted: 26 Oct 2010 01:54
by OXE_4400
Turlupin wrote:Hi,
You should try with a 8khz 16 bits Mono wav file
Turlupin
Are You sure? Recorded by 4035 files are stored in /usr7/vg/dhs/ in 8 bit, 8kHz, mono CCITT alaw format.
What correct sequence for file replacing?
Posted: 26 Oct 2010 02:32
by MGR
read in old forum below:
http://old.alcatelunleashed.com/viewtop ... 2Fvg%2Fdhs
there's a same discussion related with your topic i think
Posted: 26 Oct 2010 09:29
by OXE_4400