Alcatel Unleashed

I have to upgrade my OAW-4302 to use IPTouch Wlan 610 with WMM. On BPWS I don't found the hops from my release till 3.4.3 or 5.0.3, thanks


Alcatel Operating System-Wireless.
AOS-W (MODEL: OAW-4302), Version 3.1.0.13
Website: http://www.alcatel.com/enterprise
All Rights Reserved (c) 2005-2007, Alcatel.
Compiled on 2007-07-16 at 17:18:27 PDT (build 15591) by p4build

ROM: System Bootstrap, Version CPBoot 1.2.11 (Sep 13 2005 - 17:39:11)

Licensed Features
-----------------
Feature Status
------- ------
Access Points 6
Remote Access Points 0
MUXes 0
External Servers 0
xSec Users 0
CIM Users 0
Ortronics Access Points 0
Contexts 0
WLAN Switch ENABLED
Wireless Intrusion Protection DISABLED
RF Director ENABLED
Policy Enforcement Firewall DISABLED
Remote APs DISABLED
External Services Interface DISABLED
Client Integrity Module DISABLED
Auto Radio Resource Alloc DISABLED
Adaptive Radio Management ENABLED
VPN Server DISABLED
Wired 802.1X ENABLED
Secure Access ENABLED
Wired Grid Points ENABLED
xSec Module DISABLED
MMC AP DISABLED
Netgear AP DISABLED
Voice Services Module DISABLED

Supervisor Card slot : 0
Supervisor FPGA : None
System Serial# : AA0005632
SC Assembly# : 2010024C (Rev:05.00)
SC Serial# : F00425548 (Date:06/27/07)
HW MAC Addr : 00:0B:86:60:23:3A to 00:0B:86:60:23:3B
Line Card 1 : Present
Line Card 1 FPGA : None
Line Card 1 Switch Chip : No Switch Chip
Line Card 1 Mez Card : Absent
Line Card 1 SPOE : Absent
Line Card 1 Sup Card 0 : Present ( Active )
Internal Temperature : 49.00 degrees Celsius (NORMAL)

you can upgrade it directly 3.1->5.0
it should work. I hope that it's possible to clear all your config and do a new config.
But you need for voice with wmm the PEF-Licence for 4302.
regards
Silvio