Alcatel Unleashed

Hello compas;
Virtual GPA not running. Is the first time i see it. I don´t know what´s the problem source. Can anyone help me??

Thanks in advance..
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 5 | 0 | GD3|---------- | IN SERVICE | BAD PCMS CODE |
| 5 | 5 | SLI 16(Z)|---------- | IN SERVICE | BAD PCMS CODE |
| 5 | 6 | PRA T2|---------- | IN SERVICE | BAD PCMS CODE |
| 5 | 8 | CPU_CS(PCS)|---------- | PCS | BAD PCMS CODE |
| 5 | 27 | GPA FICTIF|---------- | INIT 2 RUN | NO PCMS CODE |
+-------------------------------------------------------------------+

vgstat 5 0

etat_vg = VG_DATA_NOT_INIT (1)

Slot 1 : Card status register = 4E Identifier = 3BA50040ATAA
Static voice guides Language : 1 - ES0

Slot 2 : Card status register = 4E Identifier =
Static voice guides Language : 255 - Not used

Slot 3 : Card status register = 4E Identifier =
Static voice guides Language : 221 - On hold music

Slot 4 : Card status register = 4E Identifier =
Static voice guides Language : 255 - Not used

Slot 5 : Card status register = 3C
Dynamic voice guides
Total size = 2096128 bytes (1024 pages) (524 sec)
Free size = 2096128 bytes (1024 pages) (524 sec)
Fill ratio = 0.0 %
Available size = 2096128 bytes (1024 pages) (524 sec)

Number of present messages = 60

I have the same problem, it happened after an energy fail and the MG didn't start anymore.

Help please!

After rstcpl 5 27 - state the same? Some incidents exist?

Yes, after rstcpl 4 27, the GPA doesn't starts.

08/06/11 12:03:48 000001M|004/06/0/016|=2:0053=DDI R2 fault 23 DtEqt -1 Info -1
08/06/11 12:04:00 000001M|---/--/-/---|=2:2166=CPU requires Reset CPL GPA (4,27) Cause 0
08/06/11 12:04:00 000001M|004/27/-/---|=3:2490=Loss of a virtual coupler GPA (4,27) of the associated coupler GD/GD3 (4,0) <--------rstpcpl 4 27
08/06/11 12:04:01 000001M|---/--/-/---|=0:1721=Phone exc 5, PC 0x086750ba neqt 30155
08/06/11 12:04:12 000001M|004/06/0/017|=2:0053=DDI R2 fault 23 DtEqt -1 Info -1
08/06/11 12:04:37 000001M|---/--/-/---|=3:1125=external alarm : "mtcl login"

# config 4 -v

+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 4 | 0 | GD3|---------- | IN SERVICE | NO PCMS CODE |
| 4 | 1 | UAI 4|---------- | IN SERVICE | NO PCMS CODE |
| 4 | 2 | SLI 16(Z)|---------- | IN SERVICE | NO PCMS CODE |
| 4 | 3 | SLI 16(Z)|---------- | IN SERVICE | NO PCMS CODE |
| 4 | 4 | APA 4|---------- | IN SERVICE | NO PCMS CODE |
| 4 | 6 |MG_PRAE1_CAS|---------- | IN SERVICE | NO PCMS CODE |
| 4 | 8 | CS2|---------- | CALL SERVER | NO PCMS CODE |
| 4 | 27 | GPA FICTIF|---------- | INIT 2 RUN | NO PCMS CODE |
+-------------------------------------------------------------------+

--- Inter Crystal Topology ---

+-------------------------------------------------------------------------+
| CR | CPL Type Role Free/Tot Role Type CPL | CR |
|-------------------------------------------------------------------------|
|004 | 00 -GD3 (MAIN ) --- 16/16 --- ( INT_A) INTIP3A - 01 |019 |
|-------------------------------------------------------------------------|

Any idea?

The solution was "shutdown -r now"... The PSTN was with problem after the energy fail, so I don't know if the problems has relationship.

Thanks for attention...

Thanks Giovanni;

i have try it and work ok.

Saludos.

I guess this was your problem.
08/06/11 12:04:01 000001M|---/--/-/---|=0:1721=Phone exc 5, PC 0x086750ba neqt 30155
excvisu and tradeq 30155 could be usefull next time.
If it happens again...
But good to know that a reboot solves the issue.

Hi!. Rebooting GD 4 0 or 5 0 should solve the problem too. Regards.

tincho.rn wrote:Hi!. Rebooting GD 4 0 or 5 0 should solve the problem too. Regards.

No, I tried 3 resets on GD and didn't work. Only after a CS reset that GPA started.

Happened again and I don't know what can cause this problem...