snmp problem
Posted: 21 Jun 2011 22:40
Hi
Below result taken from device GUI:
SNMP Statistics
In Pkts 57679
In Bad Versions 0
In Bad Community Names 57679
In Bad Community Uses 0
In ASN.1 or BER Parse Errors 0
Silent Drops 0
Proxy Drops 0
My current setting is the same as my other device, but I still getting the above result
-> show configuration snapshot
! Chassis :
system name HQ-OS6850
system location "HQ Server Room"
system timezone +08:00
! Configuration:
...
! SNMP :
snmp security no security
snmp authentication trap enable
snmp community map "public" user "sys_snmp" on
snmp station 172.18.159.225 162 "sys_snmp" v1 enable
! RIP :
! OSPF :
! BGP :
! IP multicast :
! IPv6 :
! RIPng :
! OSPF3 :
! Health monitor :
! Interface :
interfaces 1/1 duplex full
interfaces 1/1 speed 1000
interfaces 1/2 duplex full
interfaces 1/2 speed 1000
interfaces 1/3 duplex full
interfaces 1/3 speed 1000
interfaces 1/4 duplex full
interfaces 1/4 speed 1000
interfaces 1/23 autoneg disable
interfaces 1/24 hybrid FORCED-COPPER
interfaces 1/24 duplex full
interfaces 1/24 speed 1000
! Port Mapping :
! Link Aggregate :
! VLAN AGG:
! 802.1Q :
vlan 10 802.1q 1/2 "TAG PORT 1/2 VLAN 10"
vlan 10 802.1q 1/3 "TAG PORT 1/3 VLAN 10"
! Spanning tree :
bridge mode 1x1
bridge 1x1 1 1/24 disable
! Bridging :
! Bridging :
! Port mirroring :
! UDP Relay :
! Server load balance :
! System service :
! SSH :
! VRRP :
! Web :
! AMAP :
! Lan Power :
! NTP :
...
Please advice. Many Thanks!
Below result taken from device GUI:
SNMP Statistics
In Pkts 57679
In Bad Versions 0
In Bad Community Names 57679
In Bad Community Uses 0
In ASN.1 or BER Parse Errors 0
Silent Drops 0
Proxy Drops 0
My current setting is the same as my other device, but I still getting the above result
-> show configuration snapshot
! Chassis :
system name HQ-OS6850
system location "HQ Server Room"
system timezone +08:00
! Configuration:
...
! SNMP :
snmp security no security
snmp authentication trap enable
snmp community map "public" user "sys_snmp" on
snmp station 172.18.159.225 162 "sys_snmp" v1 enable
! RIP :
! OSPF :
! BGP :
! IP multicast :
! IPv6 :
! RIPng :
! OSPF3 :
! Health monitor :
! Interface :
interfaces 1/1 duplex full
interfaces 1/1 speed 1000
interfaces 1/2 duplex full
interfaces 1/2 speed 1000
interfaces 1/3 duplex full
interfaces 1/3 speed 1000
interfaces 1/4 duplex full
interfaces 1/4 speed 1000
interfaces 1/23 autoneg disable
interfaces 1/24 hybrid FORCED-COPPER
interfaces 1/24 duplex full
interfaces 1/24 speed 1000
! Port Mapping :
! Link Aggregate :
! VLAN AGG:
! 802.1Q :
vlan 10 802.1q 1/2 "TAG PORT 1/2 VLAN 10"
vlan 10 802.1q 1/3 "TAG PORT 1/3 VLAN 10"
! Spanning tree :
bridge mode 1x1
bridge 1x1 1 1/24 disable
! Bridging :
! Bridging :
! Port mirroring :
! UDP Relay :
! Server load balance :
! System service :
! SSH :
! VRRP :
! Web :
! AMAP :
! Lan Power :
! NTP :
...
Please advice. Many Thanks!