Alcatel Unleashed

Hello

I have new LLDP error message in log every 5 minutes, see below

WED JUL 06 08:42:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 08:47:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 08:52:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 08:57:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 09:02:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 09:07:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 09:12:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 09:17:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0
WED JUL 06 09:22:38 2011 LLDP error cmmLldpProcessEvent:FSM error 0

it's just lldp so no big deal but it's really annoying and making logs useless. Any idea how to get rid of these messages ? I'm going to disable lldp on all ports and start enabling one by one to see which port is causing this issue but anyway it would be nice to see what this error means.

So disabling lldp with command lldp chassis lldpdu disable and lldp chassis notification disable did not help. There are still errors in log. I enabled debug for lldp but I don't see there anything interesting

WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpGetEvent: Rx Port statistics from slot=1
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpProcessEvent: Event 4, connIdx 0
WED JUL 06 15:45:51 2011 LLDP debug3 called cmmLldpProcessSlotInfoChg
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpProcessEvent:zslot 0, state 2, Event 4
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpGetEvent: Rx TTL update msg from slot=1, msgLen=40
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpProcessEvent: Event 4, connIdx 0
WED JUL 06 15:45:51 2011 LLDP debug3 called cmmLldpProcessSlotInfoChg
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpProcessEvent:zslot 0, state 2, Event 4
WED JUL 06 15:45:51 2011 LLDP debug2 cmmLldpLegacyReceive: connIndex 11 connState ESTD
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpProcessEvent: Event 7, connIdx 11
WED JUL 06 15:45:51 2011 LLDP debug2 called cmmLldpProcessTimerTick
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpProcessTimerTick: File not saved/sync long command 3
WED JUL 06 15:45:51 2011 LLDP debug3 cmmLldpProcessEvent:zslot 0, state 2, Event 7
WED JUL 06 15:45:51 2011 LLDP error cmmLldpProcessEvent:FSM error 0

Hi,

there are number of problem reports after upgrade to 6.4.4GA, regarding "LLDP error cmmLldpProcessEvent:FSM error 0".
I think, that this issue will be solved quickly.
But if you have flash-synchro failed messages please consult this tip.

Hi,

no it's not related to flash-synchro operation. And also I'm running older version of AOS, but thank you for your reply and the tip.


switch > show microcode
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
Kbase.img 6.3.4.570.R01 15771499 Alcatel-Lucent Base Software
Kadvrout.img 6.3.4.570.R01 2745953 Alcatel-Lucent Advanced Routing
K2os.img 6.3.4.570.R01 1792720 Alcatel-Lucent OS
Keni.img 6.3.4.570.R01 5702100 Alcatel-Lucent NI software
Ksecu.img 6.3.4.570.R01 602695 Alcatel-Lucent Security Management
Kencrypt.img 6.3.4.570.R01 3437 Alcatel-Lucent Encryption Management
K2diag.img 6.3.4.570.R01 1599691 Alcatel-Lucent Diagnostic Software

i am having the same issue as above. visited this website: http://service.esd.alcatel-lucent.com/p ... idnum=9576 and applying debug flash-synchro recover doesnt helps. my switch is on AOS 6.3.4.601.R01 Service Release, May 24, 2010.
Any idea guys how to remove it from the log?

"reboot" (it works sometimes wonders...)