Alcatel Unleashed

works fine and i use it in my company. i have minimize the 4400 phone book, so the most calls out use ldap overflow by phone keybord. bad is: that incoming calls dont display the name :(

ms domaincontroler of domain telefomatic.local2

+-Consult/Modify: LDAP Phone Books---------------------------------------------+
¦ ¦
¦ Node Number (reserved) : 2 ¦
¦ Instance (reserved) : 1 ¦
¦ LDAP phone book : 1 ¦
¦ ¦
¦ Server name / IP address : 10.1.230.5 ¦
¦ Server port number : 389 ¦
¦ User identification : administrator@telefomatic.local2 ¦
¦ Directory Root Entry : dc=telefomatic,dc=local2 ¦
¦ Selection criteria : --------------------------------------- ¦
¦ ¦
¦ User password : ********* ¦
¦ Confirm : ********* ¦
¦ ¦
+------------------------------------------------------------------------------+


4760 up to r2.0

+-Consult/Modify: LDAP Phone Books---------------------------------------------+
¦ ¦
¦ Node Number (reserved) : 2 ¦
¦ Instance (reserved) : 1 ¦
¦ LDAP phone book : 1 ¦
¦ ¦
¦ Server name / IP address : 10.1.230.9 ¦
¦ Server port number : 389 ¦
¦ User identification : adminnmc ¦
¦ Directory Root Entry : o=telefomatic ¦
¦ Selection criteria : --------------------------------------- ¦
¦ ¦
¦ User password : ********* ¦
¦ Confirm : ********* ¦
¦ ¦
+------------------------------------------------------------------------------+

4760 after r2.1
+-Consult/Modify: LDAP Phone Books-----------------------------------------------------------------+
¦ ¦
¦ Node Number (reserved) : 1 ¦
¦ Instance (reserved) : 1 ¦
¦ LDAP phone book : 1 ¦
¦ ¦
¦ Server name / IP address : 10.1.230.9 ¦
¦ Server port number : 389 ¦
¦ User identification : adminnmc ¦
¦ Directory Root Entry : o=Telefomatic,o=directoryRoot ¦
¦ ¦
¦ User password : ********* ¦
¦ Confirm : ********* ¦
¦ ¦
+--------------------------------------------------------------------------------------------------+

to config:

Enteties: Ldap Phone Book select

special... :)

System\Other System Parameters

+-Consult/Modify: Signalling String------------------+
¦ ¦
¦ Node Number (reserved) : 1 ¦
¦ Instance (reserved) : 1 ¦
¦ Instance (reserved) : 1 ¦
¦ String System Option + Country Code ¦
¦ ¦
¦ Option max.len. (fixed) : 8 ¦
¦ Country Code : 49 ¦for germany contry code 49 (in numbering plan i set 49 same as main trunk prafix as possible.. so ms make no trouble with dialing rulez;)
¦ ¦
+----------------------------------------------------+

öhm.... my post is wrong at this place... please admin take it to 4760. thanks;)

Hello!!

you said that you have successfully integrated Active Directory with an Oxe?

I'm trying to do it for my company, but have many problems with the authentication, so overflows never occours

how did you configured the authentication?
is it possible to get an exportation of your entry from the ldap to compare with mine?

Best regards!!

in oxe for w2k domaincontroler:

User identification : administrator@telefomatic.local2
Directory Root Entry : dc=telefomatic,dc=local2

but then you have only the active directory users. better it is to use ESTOS meta directory and make an overflow to estos ldap. it can collect data from databases and other ldap servers like 4760 or ms-domaincontroler.