Page 1 of 1
Incident PCM R2 board
Posted: 05 Sep 2011 06:39
by enio.eltz
Hi people
What is your opinion about this incident?
04/09/11 18:22:05 000001M|005/06/-/---|=3:0011=ERROR : SU functioning 6
04/09/11 18:22:30 000001M|005/06/-/---|=3:0011=ERROR : SU functioning 6
It is a PCM R2 board. There's no problem with the calls through it. Everything works fine.
Thanks.
Re: Incident PCM R2 board
Posted: 06 Sep 2011 12:27
by enio.eltz
Hi
No opinions???
Thanks.
Re: Incident PCM R2 board
Posted: 02 May 2012 11:45
by zap_ldu
hello. enio.eltz you can solve your problem? i have the same error.
Re: Incident PCM R2 board
Posted: 03 May 2012 06:44
by enio.eltz
Hi
No, but I don't have issues, it is just this incident that I would like to know.
Re: Incident PCM R2 board
Posted: 10 Nov 2015 12:26
by pedro_alcatel_br
Hi fellas,
I've the same incident... and also no problems with calls...
Does anyone have any news about this?
Re: Incident PCM R2 board
Posted: 17 Aug 2018 09:47
by Isalcatel
Hello,
I have the same incident. If anyone have information about this I'll be glad to know.
Thanks
Re: Incident PCM R2 board
Posted: 17 Aug 2018 16:36
by cavagnaro
Ahhh marvels of Brasilian R2 which is a modification of the standard R2. Why? No clue. Had a long talk some time ago with a guy who had years here and I was surprised by it.
It shouldn't happen and that is why pbx complaints. But as far as I have traced it doesn't affect the functionality at all
Enviado de meu E6633 usando o Tapatalk
Re: Incident PCM R2 board
Posted: 16 Oct 2018 02:45
by Eliott
What does incinfo GEA 11 tells you?
Never seen before...
Re: Incident PCM R2 board
Posted: 16 Oct 2018 07:01
by enio.eltz
Hi Eliott
It tells:
Decompressing /tmpd/incid_GEA.txt
INCIDENT NUMBER: 11
Network indicator: Alcatel 4400
OBJECT CLASS: Dhs3Board
EVENT TYPE: ProcessingErrorAlarm (10)
PROBABLE CAUSE: Unknown (0)
SEVERITY: Minor
"ERROR : SU functioning P1"
"P1 : Number of SU error"
"Fonctioning error on signalling unit"
"The SU cannot interpret an order sent by the CPU."
"no reaction of the system."
"Check the configuration for the equipment indicated by its position. If the"
"configuration is correct or if the equipment is of the "TERM_ALARM" type, note""
"the incident with all its information on an observation sheet (problem report),"
"specifying if possible the error context.";
But I don't have problems with the calls through the TG where the incident is showing.
Best regards.
Re: Incident PCM R2 board
Posted: 16 Oct 2018 07:24
by Eliott
So something in the signalling is not understood. Mmm. As you say you have no issue I agree with cav and you => Ignore it.