Page 1 of 1
4039 Add-on module Freezing
Posted: 14 May 2007 12:59
by magnum
Hi All
Has anyone come across this problem,
4039 add-on module (40 Key) freezing and it becomes impossible to dial out as there are Sp-Acc keys programmed on the Add-on
software R4.1 46.01,
Any suggestions welcomed
Posted: 14 May 2007 16:19
by Eliott_DUP
Replace ADD-ON.
Posted: 15 May 2007 04:12
by magnum
Add-On has been replaced a number of times but problem keeps occuring software was upgraded to 4.1 49.01 still not fixed and the 4039 has also been replaced
Posted: 15 May 2007 05:38
by et
Try to programm some Sp-ACC keys on the set instead of on add-on module. May be you have reached maximum limit for add-on modules per cabinet: 10 - for small, 40 - for medium, 60 - for large. One time works one module, other time - another one. Latest software - R410/051.001.
Re: 4039 Add-on module Freezing
Posted: 22 Jun 2007 06:50
by magnum
Hi All
I have replaced the 4039 with an 4035 and 40 key add-on, 2weeks later same issue handset freezes up so I instaled a UAi 4 on the system and ran the switchboard only on that card, 2 weeks later same issue I am now going to change the CPU will keep you posted