Page 1 of 1

SIP Trunk between OXE 9.1 to Elastix

Posted: 17 Jan 2012 23:53
by sisob
Hello,

I setup SIP trunk between OXE 91. and Elastix 2.2. The calls from Elastix to OXE is ok, it's ringing and conversation two ways was ok. But the call from OXE to Elastix can nto go thru. When i press the first digit of Elastix extension number then i got "the digit you are dial is not authorize.Please make inquiry"
Any one had experience the same problem? What is caused this?

Thanks.

Re: SIP Trunk between OXE 9.1 to Elastix

Posted: 18 Jan 2012 03:40
by tot3nkopf
Post your traces and detail your config. Also you can take a look at this:
viewtopic.php?f=227&t=14231

Re: SIP Trunk between OXE 9.1 to Elastix

Posted: 18 Jan 2012 04:12
by sisob
Thanks. It works now. I just added second TG. 1st TG is ABC-F and 2nd is ISDN all countries.

Re: SIP Trunk between OXE 9.1 to Elastix

Posted: 18 Jan 2012 04:15
by tot3nkopf
sisob wrote:Thanks. It works now. I just added second TG. 1st TG is ABC-F and 2nd is ISDN all countries.
You don't need two. That was an example for both flavors of SIP TG.