Alcatel Unleashed

Hola a todos.

Tengo dos Oxe enlazadas por ip, y de la Oxe A quiero hacer una llamada a la red pública pero saliendo por un grupo troncal de la Oxe B.

Me pueden ayudar con este caso?.. Gracias.

Please detail your configuration (link is ABCF over IP?, do you have trunks on both PBX?). What exactly are you trying to do and where are you stuck? We cannot guess....

Hello.

I have two interconnected by OXE SIP.

The OXE 1 has 2 cards APA, as the OXE 2 has card users. (UAI, SLI).

Calls come in OXE 1 and are routed to the Oxe 2. (This scenario is running).

Now, what do I setup the OXE 2 users to make calls out through the access (APA) of the OXE 1?

Thanks in advance for the help

Hi. Configure OXE1 as SIP Ext GW of OXE2. Use ARS in OXE2, insert in the ARS table the trunk group seizure prefix of APAs before sending the number. You can insert ARS of OXE1 too, but more complex configuration. I hope you understand it. Regards

Thanks for the suggestion, I'll do the tests.

regards

jlopez wrote:Thanks for the suggestion, I'll do the tests.

regards

Hi !! jlopez can you comment if the suggestion of tincho.rn worked? I have a similar situation with 2 oxe, both are using pcm2 cards whit digital tg in a net with 35 alcatel pbx , the target is take a digital tg from a diferent node, please if someone can helpme..thanks