Alcatel Unleashed

Hello guys,

I got 2 OXOs, one with release 5 and the other with release 8, both in the last patch and i am getting the same problem.

When a call is established using the analog trunks, after 2 or 3 minutes the call drops. It doesnt matter if i received the call or i dial the call, the call drops
suddenly and the call needs to be established again.

Hope somebody can help.

Regards
Enrique

Disable busy tone detection.

Hi tot3nkopf,

Thanks for the info, i've already done that, and it works for a while , lets say 3 days and again the issue comes out. Do you think it has to do with the lables in the memory read/write flags?

Regards
Enrique

BTDMaxWOff
BTDMaxWOn
BTDMinWOff
BTDMinWOn
BuTSiDtPar
MinBusySeq

You must configure these to match busy tone provided by telco.

Hi Tot3nkopf,

You mean i should contact my telecommunications operator to match these values right?

Regards
Enrique

enrique.man wrote:Hi Tot3nkopf,

You mean i should contact my telecommunications operator to match these values right?

Regards
Enrique

Yes. Usually they don not know them themselves. It is very hard to determine them otherwise. I think krzysioD has some post with a method with some SIP trunk, recording the tone and analyzing it. never did some thing. You should search for this.

Thanks tot3nkopf,

I'll take a look at it. Let you know if everything goes fine.

Regards
Enrique