PCM2 DSP declared Out of Service
Posted: 25 Apr 2012 18:24
OXE Crystal Hardware R7.1 f5.401.36.d
Problem with DSP of PCM2 board.
Its DSP are automatically declared Out of Service after first seizure attempt and is not possible to dial anymore. Only partial solution I've found is command "tcyc aux off" but auxiliary test are enabled after every CPU reset.
I've tryied:
Change PCM2 board
Erase and recreate board, trunk group and trunks
Reinstall CPU version
It seems to be a DB problem? First PCM2 board was working well for a while so I don't think it is a version problem.
Problem with DSP of PCM2 board.
Its DSP are automatically declared Out of Service after first seizure attempt and is not possible to dial anymore. Only partial solution I've found is command "tcyc aux off" but auxiliary test are enabled after every CPU reset.
I've tryied:
Change PCM2 board
Erase and recreate board, trunk group and trunks
Reinstall CPU version
It seems to be a DB problem? First PCM2 board was working well for a while so I don't think it is a version problem.