Page 1 of 1
DTMF In Band / Out Of Band in OXE
Posted: 08 Jun 2012 12:06
by DS_Eire
Hi,
Where can I configure on the OXE whether endpoints will send DTMF In Band or Out Of Band.
Thanks
Re: DTMF In Band / Out Of Band in OXE
Posted: 08 Jun 2012 13:23
by cavagnaro
Hum...guess from the Genesys forum...
Check this:
viewtopic.php?f=264&t=17014&p=60059&hilit=inband#p60059
On External Gateway see the SIP INFO option
Re: DTMF In Band / Out Of Band in OXE
Posted: 06 Mar 2013 14:44
by luis.molinas
Hi Cav,
Where I can define which dtmf type I can use for the External Gataway??
Regards,
Re: DTMF In Band / Out Of Band in OXE
Posted: 06 Mar 2013 19:53
by cavagnaro
In the Trunk DN used. Check the SIP Server documentation so you can understand it correctly as you can also configure the extension DNs...
Re: DTMF In Band / Out Of Band in OXE
Posted: 08 Mar 2013 09:06
by luis.molinas
Thks Cav!
Re: DTMF In Band / Out Of Band in OXE
Posted: 13 Mar 2013 13:12
by luis.molinas
Hi cavagnaro, other question: Where I can define in the oxe which type of the DTMF is used for sent? I changed the opcion "INFO method for remote extension" in the external gateway to True, but I can see in the log of the media server that receives in RFC 2833.
Regards,