Qsig OXE to Siemens routing problem
Posted: 08 Aug 2012 08:35
Hello
Had an "Alcatel OXE" Rel.7.1 networked via a Siemens QSIG everything ok. Did the "Alcatel OXE" on Rel.10.0 upgraded. Calls from the "Alcatel OXE" everything ok for Siemens. Normal call from Siemens for the "Alcatel OXE" is also ok. If a subscriber in the "Alcatel" call forwarding internally (eg. 5550 to 2278). Now the subscriber (5550) from Siemens will be called. the call is routed back into the Siemens and subscriber (2278) in the Siemens is called. (but the subscriber (2278) in the "Alcatel OXE" should be called)
Thank you
Jens
this is a Trace for my problem
Had an "Alcatel OXE" Rel.7.1 networked via a Siemens QSIG everything ok. Did the "Alcatel OXE" on Rel.10.0 upgraded. Calls from the "Alcatel OXE" everything ok for Siemens. Normal call from Siemens for the "Alcatel OXE" is also ok. If a subscriber in the "Alcatel" call forwarding internally (eg. 5550 to 2278). Now the subscriber (5550) from Siemens will be called. the call is routed back into the Siemens and subscriber (2278) in the Siemens is called. (but the subscriber (2278) in the "Alcatel OXE" should be called)
Thank you
Jens
this is a Trace for my problem