Alcatel Unleashed

Greetings!!

I'm trying to setup ipfix flows on a 7750. enabled cflowd, it's active on two interfaces.

When I try to check status it says it sent records, but in reality it's not, I might be missing something.

The flows are flushed :
Raw Flow Counts Aggregate Flow Counts
Flows Created 6 0
Flows Matched 2912582 0
Flows Flushed 6 0

I have setup the collector on the default port and sampling rate to be 10. Here's more details:
===============================================================================
Cflowd Status
===============================================================================
Cflowd Admin Status : Enabled
Cflowd Oper Status : Enabled
Active Timeout : 1 minutes
Inactive Timeout : 10 seconds
Template Retransmit : 100 seconds
Cache Size : 100000 entries
Overflow : 10%
Sample Rate : 10
Aggregation Summary : (Not Specified)

Active Flows : 0
Dropped Flows : 0
Total Pkts Rcvd : 2912588
Total Pkts Dropped : 0
Overflow Events : 0
Raw Flow Counts Aggregate Flow Counts
Flows Created 6 0
Flows Matched 2912582 0
Flows Flushed 6 0

===============================================================================
Version Info
===============================================================================
Version Status Sent Open Errors
-------------------------------------------------------------------------------
5 Disabled 0 0 0
8 Disabled 0 0 0
9 Disabled 0 0 0
10 Enabled 0 0 3
===============================================================================
don't have any acl's, cflowd is applied on the interface itself.

Any inputs are greatly appreciated, Thank you

PS: No vrf enabled interfaces.