Alcatel Unleashed

Hi, does anybody know if there is a specific process for flashing a new or re-furbished UA board so that they will work on a pre rel 5.0 4400? Thanks

These are the incidents I'm seeing - incinfo indicates a version mismatch?? This is occurring when replacing a faulty board in a rel 3.2 system.
23/11/12 11:25:45 000001M|00/04/-/---|=4:0260=Beginning of downloading binua
23/11/12 11:26:08 000001M|00/04/-/---|=2:2023=Board downloading has failed
23/11/12 11:26:08 000001M|00/04/-/---|=2:2166=CPU requires Reset CPL UA (0,4) Ca
use 7

have you tried it with r4.2 and 5.0ux?

regards...

Looks like flash boot's been lost or flash memory chip is faulty.
In first case you need a special PDI card with 50088 EEPROM to rewrite boot flash area then board could be inserted in a shelf. In second case you need to replace flash memory chip with a new one if you very skilled person in DIY soldering.