Page 1 of 1
How to install new license?
Posted: 15 Jan 2013 13:08
by devilution
Hello!!
i have a OTBE with a CPU for telephony redondancy.
i have to install a new license to a OTBE.i know to install new licence in the CS-2 but not in the OTBE.
Please Help!
sorry for my english, i'm french
Re: How to install new license?
Posted: 19 Jan 2013 00:08
by streamfx
FTP the files to /var/data/licenses
/etc/init.d/flexlmd stop and start
Re: How to install new license?
Posted: 28 Jan 2013 21:02
by devilution
thank you Streamfx
i find this in administrator guide
Re: How to install new license?
Posted: 03 Nov 2019 09:37
by JACKK
Hi gents,
I have 05 eZ32 analog cards installed in a Media Gateway, I bought their licenses (160 eZ licenses).
The supplier asked me to send him the OPS files + relaese of the PABX and I did it ... i have sent him the OPS files and relaese R11 of the main node (as this media gatway ACT28 connected directly to this node via link IP (INTIP3 A&B cards)
Now, the supplier sent me these licenses to install them, he sent me a .rar file composed 05 files:
xx.mao
xx. hw
xx.swr
xx.Zip
Can I follow the same procedure to restore OPS files via FTP? in order to install these licenses
Please i need your help
Thanks in advance
Re: How to install new license?
Posted: 03 Nov 2019 11:20
by frank
Run "swinst" and backup your licenses from the easy menu.
They will be located in /usr4/BACKUP/OPS - Just FTP them somewhere safe.
Then erase those files, and upload the new licenses ( in the same folder )
Then from swinst, menu 1 then menu 6 to load new OPS (running, active partition).
You might have to reboot. And off you go!