Alcatel Unleashed

I there any way that I can put an automatic pause between digits in abbreviated dialling (Speed-Dial) or direct speed-dial number
Example: 81pause3456pause123
.

w character?

Do you mean i should put a w for a pause

Maybe I was not clear what I want I want to send a number ie 81 then i want the PABX to wait for some seconds before sending the next digits. In South Africa we use a number then you wait before sending the next digits. Example 81 then wait then send the next digits. ie:- 81 wait 23456

you will need to use dialling command table under ARS easy!!

Thanks Oldboy for pointing me in the right direction I will program the dialling command table

Hi Peetb.

I see you posted a question about a Pause key some time ago, and were advised to do this in the ARS table. Can you advise if it worked and what you actually did. I want to create a speed dial or "button" on a user's handset that dials a string something like this. 02xxxx xxxx PP yyy P zzzz

Where
• xxxx is the number
• yyy is the mailbox number
• zzzz is the PIN code

If I can get passed this step, then maybe I can go a bit further to get to Option 9 and then 6 for nomadic mode, dependin on how many digits and pauses I can put in.

Appreciate your thoughts and reply

S.