Alcatel Unleashed

Hello, i have a problem with some switches 6850. I tried to show the configuration snapshot, this is not show and i try with the commad "show log swlog" not shown me anything. The last printout of the "show log swlog" shown me the next error messages:

SESSION error [SES]: zcBufCreate failed
SESSION error management/switch_management/session_manager/src/sesmgr_news.c: sesmgr_news_loop
SESSION error [Count.]: 205
SESSION error [SES]: zcBufCreate failed
SESSION error management/switch_management/session_manager/src/sesmgr_news.c: sesmgr_news_loop
SESSION error [Count.]: 205
SYSTEM error Message from an unknown session (24)
SESSION error [SES]: zcBufCreate failed
SESSION error management/switch_management/session_manager/src/sesmgr_news.c: sesmgr_news_loop
SESSION error [Count.]: 205
SESSION error [SES 24]: zcBufCreate failed
SESSION error management/switch_management/session_manager/src/sesmgr_aaa_msg.c: sesmgr_aaa_se
SESSION error [Count.]nd_msg: 263

Any idea of cause of the problem?

Thanks for your replies!

From the error message I'd suspect that there is a "faulty session". I'd suggest that you issue "who" on the switch and "kill" all sessions that are there (obviously those that are not your current).

Do you get that error regardless if you telnet or ssh to the switch?

When I reviewed the error messages, all of those came from very old AOS releases. It might be a good idea to upgrade to the latest AOS 6.4.4.R01 Maintenance Release.

B

Hi benny, this error shows me when login via ssh, telnet is disable. I get the next error messages too:

--> show log swlog
ERROR: display error (incorrect index = 0)

The switch have the AOS Alcatel-Lucent OS6850-48 6.4.4.463.R01 Service Release, March 02, 2012

Thanks for your reply.

Hi Benny, the switch have the next OS:

Description: Alcatel-Lucent OS6850-48 6.4.4.463.R01 Service Release, March 02, 2012.,
Object ID: 1.3.6.1.4.1.6486.800.1.1.2.1.7.1.2,

If i try the command "show log swlog", this shows me:

--> show log swlog
ERROR: display error (incorrect index = 0)

However, sometimes if it shows me the log correctly.

Thanks for your replies.

henriogp wrote:Hi Benny, the switch have the next OS:

Description: Alcatel-Lucent OS6850-48 6.4.4.463.R01 Service Release, March 02, 2012.,
Object ID: 1.3.6.1.4.1.6486.800.1.1.2.1.7.1.2,

If i try the command "show log swlog", this shows me:

--> show log swlog
ERROR: display error (incorrect index = 0)

However, sometimes if it shows me the log correctly.

Thanks for your replies.

i think its swlog error just clear swlog with swlog clear