Alcatel Unleashed

hi

I have a problem with my omniswitch 6250.

I've enabled the POE in the switch , and connecting 16 IP Phones from port 1 to 16. the problem is the switch keeps rebooting after a while.

does anyone knows what is the problem ?

this is the version of the AOS :

Alcatel-Lucent OS6250-P24 6.6.3.372.R01 GA, May 14, 2012.,

I have multiple 6250-PoE (with ~20-24 IP Phones connected) and never had this issue.

See whether you have any crash-dump files (.pmd .trace ...) in the switch.

try updating the aos to a more recent version (latest ist imho 6.6.3.509), the 372 had some serious issues (at least on 6450) thats why the new GA is 6.6.3.4XX

Thanks.

But you know i was reading the hardware guide. It says that you can use either from port 1 -6 and 23 - 24 or 25-26. Or use from 7 to 22. They said only one range of ports can be used.

Do you have any idea about this ?

Sent from my GT-N5100 using Tapatalk

where did you find that?

It is correct that you can only use PoE on 23/24 OR 25/26 (switch to 25/26 with "lanpower 1 combo-port enable")
I have never heard of the 1-6 or 7-22 rule..
It maybe that you mixed that with the 802.3at PoE+ (with up to 25,5W PoE) which is only available on Port 1-6 and the combo Ports? You can still use "normal" PoE on all Ports (1-24) as long as you Power Budget is not fully used.

Upgrade away from the 6.6.3.372

Please look at the attached file. Look at the highlighted one. Tell me what did you understand from it, maybe i misunderstood .

Sent from my GT-N5100 using Tapatalk

Anyway i upgraded AOS to 6.6.4 . i will let you know if it worked.

[quote="mohdkw"]Please look at the attached file. Look at the highlighted one. Tell me what did you understand from it, maybe i misunderstood .

Hi,
This means poe at (23 and 24) or at (25 and 26)
regards
Silvio