Alcatel Unleashed

I saw these logs ...

WED FEB 19 15:44:13 2014 INTERFACE debug1 lbdProcessMsg:459 Recieved: LBD_STATS for slot = 1
WED FEB 19 15:44:18 2014 INTERFACE debug1 lbdProcessMsg:459 Recieved: LBD_STATS for slot = 1
WED FEB 19 15:44:23 2014 INTERFACE debug1 lbdProcessMsg:459 Recieved: LBD_STATS for slot = 1
WED FEB 19 15:44:28 2014 INTERFACE debug1 lbdProcessMsg:459 Recieved: LBD_STATS for slot = 1
WED FEB 19 15:44:33 2014 INTERFACE debug1 lbdProcessMsg:459 Recieved: LBD_STATS for slot = 1
WED FEB 19 15:44:38 2014 INTERFACE debug1 lbdProcessMsg:459 Recieved: LBD_STATS for slot = 1




-> show loopback-detection statistics port 1/11
LBD Port Statistics
LBD Packet Send : 679
Invalid LBD Packet Received : 0

-> show loopback-detection statistics port 1/12
LBD Port Statistics
LBD Packet Send : 679
Invalid LBD Packet Received : 0

-> show loopback-detection statistics port 1/13
LBD Port Statistics
LBD Packet Send : 679
Invalid LBD Packet Received : 0

-> show loopback-detection statistics port 1/14
LBD Port Statistics
LBD Packet Send : 679
Invalid LBD Packet Received : 0


Behind the myic SIP Phone and the phone port wireless router in use.

LBD packet that gradually over time to detect and count the loop count're really're going up I do not know

Hi,
this messages are not bad. If the LBD packet will come back to one of the lbd-ports than the port go to shutdown. You can check with "show interface port".

regards
Silvio