Alcatel Unleashed

Hi all,

I 'm installing one IBS -DECT system on OXE Common harwd rel 11.0, and need to know the carriers frequency for Latam ( South America), on the mgr menu help figure this data for European system (Europe – 1880-1900 MHz )
I need this same data but for Latam system ( Latam – 1910-1930 MHz range)

Thanks in advance.
M

Review/Modify: PWT/DECT System >

...
¦ Carriers available ¦
¦ ¦
¦ Carrier 0 + YES ¦
¦ Carrier 1 + YES ¦
¦ Carrier 2 + YES ¦
¦ Carrier 3 + YES ¦
¦ Carrier 4 + YES ¦
¦ Carrier 5 + YES ¦
¦ Carrier 6 + YES ¦
¦ Carrier 7 + YES ¦
¦ Carrier 8 + YES ¦
}¦ For information: the carriers are distributed between 1880 MHz and 1900 MHz: ¦
¦ Carrier 0: 1897.344 MHz ¦
¦ Carrier 1: 1895.616 MHz ¦
¦ Carrier 2: 1893.888 MHz ¦
¦ Carrier 3: 1892.160 MHz ¦
¦ Carrier 4: 1890.432 MHz ¦
¦ Carrier 5: 1888.704 MHz ¦
¦ Carrier 6: 1886.976 MHz ¦
¦ Carrier 7: 1885.248 MHz ¦
¦ Carrier 8: 1883.520 MHz

?? Like you have to talk to the carriers in your country...

cavagnaro wrote:?? Like you have to talk to the carriers in your country...

Hi,
If you pay attention to my post, I'm asking for the Oxe's transmission freqs for Latam ( Carrier 0 to 9 on mgr menu ) in order to turn off those which overlap with my local carriers (of course i know my local carrier's freqs)

Thanks,
M

and need to know the carriers frequency for Latam ( South America)

Nop, you asked for carriers frequencies, not OXE configured ones...maybe a translation issue...

You have up to 10 possible carriers. The frequencies are only those. As far as I know you can't change them on OXE. You can only change the DECT type used (Latam, China, Europe, etc.)

Just to complete further...the frequencies are used to Transmit, so if one overlaps something like a military-forbidden-to-use range, you then disable that frenquecy/carrier.

cavagnaro wrote:

and need to know the carriers frequency for Latam ( South America)

Nop, you asked for carriers frequencies, not OXE configured ones...maybe a translation issue...

You have up to 10 possible carriers. The frequencies are only those. As far as I know you can't change them on OXE. You can only change the DECT type used (Latam, China, Europe, etc.)

Maybe a traslation issue, but if you read the complete sentenece you find a clue.. (also on the print screen)
"..and need to know the carriers frequency for Latam ( South America), on the mgr menu help figure this data for European system (Europe – 1880-1900 MHz )"

I am sure that the IBS frequency is special for Latam ( South America), this can be set on PWT/DECT System menu on “STATION BASE TYPE” field and the IBS hardware is special for this region
3BN67162AB 4070EO IBS OUTDOOR SHIFTED FREQ. LAT.AM.

On page 5 the IBS Base Station manual specify that frequency range but I need each carrier information (carrier 0 to 9) as I said on my previous posts in order to turn off those that overlap with my local carrier Mobile frequencies.

Manual quote:
"There is also a version of the IBS NG base station with radio modules that can operate in a
frequency range different from the range used in Europe (1880 to 1900 MHz). This concerns:
- Latin (South) America (1912.896 to 1928.448 MHz)."

I hope this clarifies my request.

Regards,
M

Sure, but who irradiates those frequencies are the Base. The help on OXE is a reference only. You can see this if you put NorthAmerica in OXE for example, the carriers are restricted to 5 only or 4.
So if you have the LATAM equipment (purchased like that) operating on those frequencies you only decide which frequencies to enable or not. If your Telecom laws doesn't allow you to use a specific band because a conflict of some sort then you disable it.
Or you mean you want to know which frequency range is associated with each Carrier parameter?

cavagnaro wrote:Sure, but who irradiates those frequencies are the Base. The help on OXE is a reference only. You can see this if you put NorthAmerica in OXE for example, the carriers are restricted to 5 only or 4.
So if you have the LATAM equipment (purchased like that) operating on those frequencies you only decide which frequencies to enable or not. If your Telecom laws doesn't allow you to use a specific band because a conflict of some sort then you disable it.
Or you mean you want to know which frequency range is associated with each Carrier parameter?

Yes, finally you understood my request..
I want to know the mapping between freq range and Carrier 0 to 9 parameter for Latam system.

Regards,
M

Hi,
I am attaching the list of OXE frequencies for Latam ( South America), carries 0 to 9.
Alcatel SR font.

Regards,
M

Nice, from where you got this for future reference?
Thanks