Alcatel Unleashed

Hi everybody!
i got a new project and it's the first time i work with Alcatel switches.
i have a few thing's for finish the designd of the network, one of them is the VOIP.
my data vlan in the network it's vlan 100
my telephony vlan in the network it's vlan 200.
i have to connect several cisco phone's in the switche's in the network.
i read about "Mobile-tag" and "Port mobile" and i dont understand the meaning of this.
i saw some configuration on switches and port's to use voip and i cand find common denominator for the configuration.

i need your's help to designd the command's in the "switch level" and designd the command's for the port's.

Thank you
Pini Elbaz

Hi ,

Have you found solution to your requrement because i nalso need to configure the same setting in my premises, kindly help if you found

do you simply need to add two vlans to a port?

vlan 100 enable name data
vlan 100 802.1q 1/26 "tagged port"
vlan 100 port default 1/6

tagged on 26, access on 6.

vlan 200 enable name voip
vlan 200 802.1q 1/26 "tagged port"
vlan 200 802.1q 1/6 "tagged port"

Here are two scripts for the type of Cisco phone on an Alcatel Switch:

LLDP Phone Configuration
! VLAN :
vlan 6 enable name "voice"
vlan 8 enable name "data"
vlan 8 port default 1/1
! 802.1Q :
vlan 6 802.1q 1/1 "TAG PORT 1/1 VLAN 6"
! LLDP:
lldp network-policy 1 application voice vlan 6 l2-priority 5 dscp 46
lldp 1/1 tlv med capability enable network-policy enable
lldp 1/1 med network-policy 1
lldp chassis tlv med network-policy enable
! QOS:
qos trust ports
qos apply

Non LLDP Phone Configuration
! VLAN :
vlan 6 enable name "voice"
vlan 8 enable name "data"
vlan 8 port default 1/1
vlan port mobile 1/1
vlan 6 mac range 00:00:00:11:22:00 00:00:00:11:22:11
! Qos:
qos trust ports
policy condition voiceVlanCond source vlan 6
policy action voiceVlanAct priority 5 dscp 46
policy rule voiceVlanRule condition voiceVlanCond action voiceVlanAct
qos apply