Page 1 of 1

Virtualized OXE

Posted: 27 Nov 2014 11:20
by manoj
Hi all,

I am going to setup a virtualized OXE R11.0.1. I have got the ops and license dongle from ALU and I have managed to install oxe in the virtual machine and connect the license dongle in the Physical machine(host of the virtual OXE). After uploading the OPS I am getting the "30 remaining days" alarm and panic flag is 0.

so is it really need a separate virtualized License server for my case. Please advice..

Re: Virtualized OXE

Posted: 27 Nov 2014 11:32
by tot3nkopf
You need the flexlm server (or a pair if redundant) - linux centos machines and you need to configure per documentation.

Re: Virtualized OXE

Posted: 28 Nov 2014 04:00
by manoj
I forget to share one thing that we have OTMS also in the same place. My plan was first to install OXE then after that I will start with OTMS installation.

External License is really required if I have Virtualized OXE with OTMS?

Re: Virtualized OXE

Posted: 28 Nov 2014 17:31
by murraya
yes if you have virtualised OXE you need external license server. you can have one license server that serves both OXE and OTMS you just need to configure OTMS to external license server during install.