Alcatel Unleashed

Posted: **05 Feb 2015 09:42**

I was forced to configure a HP G/XG6125 with a Alcatel Switch.

I tried to configure a standard LACP

! Link Aggregate :
lacp linkagg 1 size 2 admin state enable
lacp linkagg 1 actor admin key 1
lacp agg 1/1 actor admin key 1
lacp agg 1/2 actor admin key 1

and attached 2 Gigabit ports form the 6125 Blade (running IRF) towards the 6450.

On HP side (i am no HP guy :-/) i configured by manual:

Code: Select all

system-view
interface bridge-aggregation 20
link-aggregation mode dynamic
interface gi 1/1/5
port link-aggregation group 20
interface gi 2/1/5
port link-aggregation group

unfortunatly LACP won't come up.

Alcatel:

Code: Select all

-> show linkagg port

Slot/Port Aggregate SNMP Id   Status   Agg  Oper Link Prim
---------+---------+-------+----------+----+----+----+----
   1/1    Dynamic     1001  CONFIGURED NONE DOWN UP   UNK
   1/2    Dynamic     1002  CONFIGURED NONE DOWN UP   UNK
-> show linkagg 1

Dynamic Aggregate
  SNMP Id                  : 40000001,
  Aggregate Number         : 1,
  SNMP Descriptor          : Dynamic Aggregate Number 1 ref 40000001 size 2,
  Name                     : ,
  Admin State              : ENABLED,
  Operational State        : DOWN,
  Aggregate Size           : 2,
  Number of Selected Ports : 0,
  Number of Reserved Ports : 0,
  Number of Attached Ports : 0,
  Primary Port             : NONE
LACP
  MACAddress               : [00:00:00:00:00:00],
  Actor System Id          : [00:00:00:00:00:00],
  Actor System Priority    : 0,
  Actor Admin Key          : 1,
  Actor Oper Key           : 1,
  Partner System Id        : [00:00:00:00:00:00],
  Partner System Priority  : 0,
  Partner Admin Key        : 0,
  Partner Oper Key         : 0
  Wait-To-Restore Timer    : 0

HP Side:

Code: Select all

display link-aggregation verbose 
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
        D -- Synchronization, E -- Collecting, F -- Distributing,
        G -- Defaulted, H -- Expired

Aggregation Interface: Bridge-Aggregation20
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, cc3e-5f0d-00ef
Local:
  Port             Status  Priority Oper-Key  Flag
--------------------------------------------------------------------------------
  GE1/1/5          U       32768    1         {A}
  GE2/1/5          U       32768    1         {A}
Remote:
  Actor            Partner Priority Oper-Key  SystemID               Flag
--------------------------------------------------------------------------------
  GE1/1/5          1024    0        1         0x0   , e8e7-32d2-6ce0 {ABCG}
  GE2/1/5          1025    0        1         0x0   , e8e7-32d2-6ce0 {ABCG}

display link-aggregation member-port 
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
       D -- Synchronization, E -- Collecting, F -- Distributing,
       G -- Defaulted, H -- Expired

GigabitEthernet1/1/5:
Aggregation Interface: Bridge-Aggregation20
Local:
    Port Number: 17
    Port Priority: 32768
    Oper-Key: 1
    Flag: {A}
Remote:
    System ID: 0x0, e8e7-32d2-6ce0
    Port Number: 1024
    Port Priority: 0
    Oper-Key: 1
    Flag: {ABCG}
Received LACP Packets: 97 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 1 packet(s)

GigabitEthernet2/1/5:
Aggregation Interface: Bridge-Aggregation20
Local:          
    Port Number: 46
    Port Priority: 32768
    Oper-Key: 1
    Flag: {A}
Remote:
    System ID: 0x0, e8e7-32d2-6ce0
    Port Number: 1025
    Port Priority: 0
    Oper-Key: 1
    Flag: {ABCG}
Received LACP Packets: 87 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 1 packet(s)

Has anyone any HP experiences and could help?

Posted: **02 Mar 2015 08:52**

Fixed it myself, probably was some kind of configuration crap leftover in HP. After defaulting the HP side it went fine.

Alcatel Unleashed

HP XG6125 Blade-Switch with Alcatel

HP XG6125 Blade-Switch with Alcatel

Re: HP XG6125 Blade-Switch with Alcatel