Alcatel ip touch 4028 -Hardreset- unable to Telnet
Alcatel ip touch 4028 -Hardreset- unable to Telnet
Hi I've had no look so far trying to reset this phone via Telnet, as I cant change its Ip address-Locked admin menu needing password.
ive tried the "industrial mode",1,2,3(i). as from other posts but still i cant access it.
Theres nothing to help in the documents.
ive tried the "industrial mode",1,2,3(i). as from other posts but still i cant access it.
Theres nothing to help in the documents.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
What are you trying to do? When phone starts you press i * (star) and will show menu.
It is described even on the simple sheet that comes with every phone
It is described even on the simple sheet that comes with every phone
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
when you push (i) * it shows "Admin password"(ive tryed some passwords but they dont seem to work) ,its a 2nd hand phone so it was connected to a phone system, but we are unable to change its IP settings to join it to our system.
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
Ive been trying to Telnet the set to reset it. as its setting menu is unacessable
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
the main thing Im after is to purely factory reset the Set.
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
thanks for your response, i have tried what you suggested and it still rejects both password/s, any thing else i could try? have two sets like it, managed to get one back to normal by using "industrial mode" method and was able to reset it via telnet useing the thales reset command, would i be able to maybe get its ip by connecting it to a router?
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
Connect to your laptop port and do a wireshark. You will see its IP Address if have any. Or 169.x.x.x if DHCP exhausts searching method
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
Thanks ill get back to you tomorrow!
Re: Alcatel ip touch 4028 -Hardreset- unable to Telnet
Ive tried wireshark it cant fined the address (also with industrial mode) amusing the Set is dead.