Alcatel Unleashed

Dear community

I have an external snmp manager and not omnivista working.
I would like to read out POE informations of the interfaces via snmp.

pethPsePortTable OID 1.3.6.1.2.1.105 = gives only a empty response

With the object alaPethPsePortTable I read out POE informations but not in link with a a interface number

I am using a OS6450-P48 SW 6.6.3.509.R01


Maybe somebody have solution or a hint how to achive my goal.

Best Regards

daniel

Hello Daniel

Here my output
If I use MIB, mib translate to 801 instead 800

Exemple :
snmptranslate -O n ALCATEL-IND1-INLINE-POWER-MIB::alaPethPsePortTable
.1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1

but he switch will respond with base .1.3.6.1.4.1.6486.800 not as we receive from mib file .1.3.6.1.4.1.6486.801

mmmmm

cedricdhertsmbp:mibs cdanichert$ /usr/bin/snmpwalk -v 3 -u snmpv3 -l authPriv -a SHA -A mykey -x DES -X mykey -t 3 -O n 10.10.10.1 SNMPv2-SMI::enterprises.6486.800.1.2.1.27.1.1.1.1.2
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.1 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.2 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.3 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.4 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.5 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.6 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.7 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.8 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.9 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.10 = INTEGER: 6000
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.11 = INTEGER: 5700
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.12 = INTEGER: 4000
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.13 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.14 = INTEGER: 3900
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.15 = INTEGER: 4000
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.16 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.17 = INTEGER: 3600
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.18 = INTEGER: 3900
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.19 = INTEGER: 3900
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.20 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.21 = INTEGER: 4000
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.22 = INTEGER: 4000
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.23 = INTEGER: 0
.1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2.4.24 = INTEGER: 0
cedricdhertsmbp:mibs cdanichert$ !ssh
ssh admin@10.10.10.1
admin's password for keyboard-interactive method:


Welcome to the Alcatel-Lucent OmniSwitch 6450
Software Version 6.6.3.531.R01 Service Release, February 20, 2014.

Copyright(c), 1994-2012 Alcatel-Lucent. All Rights reserved.

OmniSwitch(TM) is a trademark of Alcatel-Lucent registered
in the United States Patent and Trademark Office.

6450-663=> show lanpower 4
Port Maximum(mW) Actual Used(mW) Status Priority On/Off Class
----+-----------+---------------+-----------+---------+--------+-------
1 31000 0 Powered Off Low ON -
2 31000 0 Powered Off Low ON -
3 31000 0 Powered Off Low ON -
4 31000 0 Powered Off Low ON -
5 31000 0 Powered Off Low ON -
6 31000 0 Powered Off Low ON -
7 31000 0 Powered Off Low ON -
8 31000 0 Powered Off Low ON -
9 31000 0 Powered Off Low ON -
10 31000 5900 Powered On Low ON 3
11 31000 5700 Powered On Low ON 3
12 31000 4000 Powered On Low ON 4
13 31000 0 Powered Off Low ON -
14 31000 4000 Powered On Low ON 4
15 31000 4000 Powered On Low ON 4
16 31000 0 Powered Off Low ON -
17 31000 3700 Powered On Low ON 4
18 31000 3900 Powered On Low ON 4
19 31000 3900 Powered On Low ON 4
20 31000 0 Powered Off Low ON -
21 31000 4000 Powered On Low ON 4
22 31000 4000 Powered On Low ON 4
23 31000 0 Powered Off Low OFF -
24 31000 0 Powered Off Low ON -

Slot 4 Max Watts 410
1+1 Redundant Power Supplies Available

Cedric