Alcatel Unleashed

Hi Guys,

I knew that there are many topics on the installation of OXE into the virtual machine.
However, I still wasn't able to complete the installation .

I'm using VMware ver.11.0.0 build-2305329 on windows 7 64 bit.
And I used PC installer 2.24 to install Linux and the call handling software to the virtual machine on it.

Configuration of virtual machine for oxe is following;
OS:Other Linux
Main memory:256MB
Storage:8GB
Network adapter: network connection host-only.

And configuration of PC installer is following;
Call Server type:Blade server.
Call handling version:I tried to install OXER91_I160541.
Installation type:Standard
Network type:Company Network
Network interface: I have selected wirless lan card 1x1 11 b/g/n.
Ip address: automatically put by pc installer
Ethernet address: MAC address of virtual machine

I tried to install R9.1 but all attempts were failed.
It seems that the virtual machine could get IP from host PC.
after the massage of DHCP.....
on the screen i see this error message
PXE-E53: NO BOOT FILENAME RECEIVED
PXE-M0F: EXITING INTEL PXE ROM
OPERATING SYSTEM NOT FOUND

Somebody has some experience on this problem?
Thank you very much.


Please advise.

vituccio1981 wrote: Network adapter: network connection host-only.

vituccio1981 wrote: Network type:Company Network
Network interface: I have selected wirless lan card 1x1 11 b/g/n.

network interface has to be the vmware hostonly network adapter (as configured in vm)
network type can be direct cable, in case of hostonly.

regards...


--- back to basics... focus your eyes on the essential things... ---