Page 1 of 1
How to configure SNMPv3 securely on ALU OS6450
Posted: 03 May 2016 02:53
by alcomint
Can someone spare sometime and help in creating an account and configure snmpv3??
Re: How to configure SNMPv3 securely on ALU OS6450
Posted: 03 May 2016 04:16
by devnull
user mysnmpv3user password SNMPPASS123 read-write all sha+des
aaa authentication snmp local
thats all that is needed to access the switch with snmpv3 with the user "mysnmpv3user" and password "SNMPPASS123"
(Password has to be at least 8 chars otherwise snmpv3 will silently fail)
Re: How to configure SNMPv3 securely on ALU OS6450
Posted: 03 May 2016 04:28
by alcomint
Thanks devnull, I am trying to access the switch through linux but I am failing again and again. how can I do that?
Re: How to configure SNMPv3 securely on ALU OS6450
Posted: 03 May 2016 05:10
by alcomint
I actually have configured snmp without authentication:
status community string user name
--------+--------------------------------+--------------------------------
enabled private npprivate
enabled public nppublic
When I am trying to snmpwalk at cents terminal
snmpwalk -Os -c public -v 2c 178.13.240.48
Timeout: No Response from 178.13.240.48
Re: How to configure SNMPv3 securely on ALU OS6450
Posted: 03 May 2016 17:26
by silvio
snmp v3 without authentication? not possible.
but your command snmpwalk shows the answer: you use snmp v2
than try this one:
Code: Select all
> aaa authentication snmp local
> user OV-READ password OV-READ-PW read-only all no auth
> snmp community map public user OV-READ
> snmp security no security
regards
Silvio