Page 1 of 1
sap 9/1/8
Posted: 30 May 2016 17:49
by mike18
Hi Everyone,
Under VPLS I see
sap 9/1/8:100 create
Does 9/1/8 mean slot/mda/port?
Regards
Mike
Re: sap 9/1/8
Posted: 31 May 2016 02:54
by Stoffen
Hi.
Yes it does

Re: sap 9/1/8
Posted: 31 May 2016 10:54
by mike18
Many thanks Christoffer.
Re: sap 9/1/8
Posted: 06 Jun 2016 18:22
by mike18
And 100 here is subinterface of physical interface or it is referring to the vlan?
Re: sap 9/1/8
Posted: 07 Jun 2016 04:12
by mivens
Traffic to/from SAP 9/1/8:100 is tagged with dot1q VLAN ID 100 on the physical port 9/1/8.
In SR OS an interface is configured separately and then associated with a SAP. You configure the IP address on the interface.
Take a look at the section "Service Access Points" in the
Services Guide
Re: sap 9/1/8
Posted: 07 Jun 2016 12:47
by mike18
Many thanks Mivens
Regards
Mike