Page 1 of 1

Changing Auto-negotiate

Posted: 12 Sep 2016 09:30
by Eagleman
Hi Guys,
I tried to change the authonegotiation of a port in a SAP but kept receiving the following error.

MINOR: PMGR #1005 Invalid value - Cannot set autonegotiate for 3/1/11

I have remove the same from the service yet to no avail,

Thanks for your great help!

Re: Changing Auto-negotiate

Posted: 12 Sep 2016 11:01
by vasudha202
Is this a 10g port? Then you cannot change autonegotiate for it.

Re: Changing Auto-negotiate

Posted: 12 Sep 2016 11:48
by Eagleman
Hi,
Thanks for your reply. Unfortunately, this is an 100MB pipe.

Any further idea from any other shall be greatly appreciated!!

Re: Changing Auto-negotiate

Posted: 15 Sep 2016 12:56
by mivens
My guess is that either the IMM/MDA or transceiver type means autonegotiate is not supported on that port.