Page 1 of 2
Set must be multi line! ERROR
Posted: 04 Oct 2016 13:35
by cemsayin
Hello Good Working.
I can not add numbers in supervision mode f1.
I encountered this problem.
Set must be multi line!
I build again erased numbers
Bazı abonelerde bu f1 tuşuna yani 73 numaralı tuşa sorunsuz supervision ekleyebiliyorum.
Help Me Thank you
Adsız.jpg
Merhaba Bu yazı
Re: Set must be multi line! ERROR
Posted: 04 Oct 2016 14:25
by cavagnaro
Add a multi line key on the set keys
Enviado de meu E6633 usando Tapatalk
Re: Set must be multi line! ERROR
Posted: 04 Oct 2016 14:45
by cemsayin
I have added but is not
Re: Set must be multi line! ERROR
Posted: 04 Oct 2016 14:59
by cavagnaro
Show your keys
Re: Set must be multi line! ERROR
Posted: 04 Oct 2016 15:31
by cemsayin
please
Re: Set must be multi line! ERROR
Posted: 04 Oct 2016 16:21
by cavagnaro
There is no Multi line key configured, instead of Programming should say MultiLine...read basic documentation pls
Re: Set must be multi line! ERROR
Posted: 06 Oct 2016 05:19
by cemsayin
It is not
Re: Set must be multi line! ERROR
Posted: 06 Oct 2016 05:28
by cemsayin
team viewer 10 ıd : 564920340- password 9443
Re: Set must be multi line! ERROR
Posted: 06 Oct 2016 06:40
by vad
For multiline - at least one key must be "multi-line" (not programmed).
First multi-line key shall be wit number=set directory number, another multi-line keys can be with another number.
F.e. for set 3000 you need to create one multi-line key with number 3000.
You can create more multi-line keys 3000 (set can receive many calls to 3000 at the same time).
You can create multi-line key f.e. 2000 (number must be free) - in this case you can call set by dialling 3000 or 2000. Incoming calls will be present on corresponding multi-line key.
Re: Set must be multi line! ERROR
Posted: 06 Oct 2016 06:59
by tgn
cemsayin wrote:team viewer 10 ıd : 564920340- password 9443
bad try... i'll make your work only if you pay my bill.
regards...