Problems with communication between CS and FlexLM
Posted: 21 Dec 2016 08:37
Hi all. It is my first post. My name is Grzegorz and I am from Poland. I'm trying to start my first DEMO system in my lab. The system consists of:
CS - Virtualized (VMware 5.5) main IP 192.168.7.80
FlexLM - Virtualized (VMware 5.5) IP: 192.168.7.63
OXE shelf with GD3, PCS and line boards
In the future I will want to install OT on Virtual machine too.
I have OXE in version R11.2 29b
The main problem is no communication between CS and FlexLM. System works about 5 hours and then rise Panic Flex flag to 1.
I have configured FlexLM parameters on CS like below:
┌─Review/Modify: Licenses────────────────────────────────┐
│ │
│ Node Number (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Instance (reserved) : 1 │
│ │
│ FlexLM Licensing Enabled + YES │
│ Flex Server IP Address : 192.168.7.63 │
│ Flex Server Port : 27000 │
│ Flex Server 2 IP Address : 00.00.00.00 │
│ Flex Server 2 Port : 0 │
│ ProductID discovery + YES │
│ Use Flex License + NO │
│ │
└────────────────────────────────────────────────────────┘
I attached the dongle to FlexLM and copied my .ice file to /opt/Alcatel-Lucent/data/licenses. Then I restarted the server.
Ping works OK in both directions, but after "incvisu" command on CS I see problems with communication like below:
21/12/16 08:26:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:29:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:32:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:35:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:38:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
etc.
Below a part of my flexlmtrace from CS:
08:20:17 Begin MAIN ...
08:20:17 CPU role is main
08:20:17 Flexagent is starting ...
08:20:17 Load of licenses configuration...
08:20:17 Load of license RSI-5 version=1.0
08:20:17 Init License ...
08:20:17 License not enabled. No checkout done ...
08:20:17 End of load of licenses configuration...
08:20:17 MAO Listener: init port ...
08:20:17 MAO Listener: init port OK
08:20:17 Call handling IPC listener starting ...
08:20:17 MAO Listener: waiting for CH request ...
08:20:53 Flex enabled : 1
08:20:53 Flex Product Id : 1
08:20:53 Flex Use License : 0
08:20:53 PanicFlag : 0
08:20:53 PanicFlex : 0
08:20:53 MAO Listener: Request received from CH ...
08:20:53 Creating a LICENSE CREATION request...
08:20:53 FlexLicenseCreationRequest: Feature Name : K00006243
08:20:53 FlexLicenseCreationRequest: Number Of Licenses: 1
08:20:53 Processing the request...
08:20:53 27000 192.168.7.63 0 00.00.00.00 K00006243 1.0 1
08:20:53 Init License ...
08:20:53 Init of connection to FlexLM Server ...
08:20:53 x_flexlm_newid_job
08:20:53 [Stdalone] Connection to 27000@192.168.7.63 initialized
08:20:53 Init License OK. Checkout ...
08:20:53 [Stdalone] Defense thread starting ...
08:20:53 [Stdalone] Checkout Not OK !! Reason = : -15
08:20:53 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com". Checkout
08:20:53 handleCHRequest : deleting request...
08:20:55 [Stdalone] Period attempt - Waiting for 180s
08:23:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:23:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:23:55 [Stdalone] No response to the heartbeat: Reason = -1
08:23:55 [Stdalone] Reconnection attempts: : 1
08:23:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
08:23:55 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Defense FlexLM server does not respond to checkout requests
08:23:55 ------ Feature: K00006243 - End of KEEPALIVE ----
08:23:55 [Stdalone] Period attempt - Waiting for 180s
08:26:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:26:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:26:55 [Stdalone] No response to the heartbeat: Reason = -1
08:26:55 [Stdalone] Reconnection attempts: : 2
08:26:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
08:26:55 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Defense FlexLM server does not respond to checkout requests
08:26:55 ------ Feature: K00006243 - End of KEEPALIVE ----
08:26:55 [Stdalone] Period attempt - Waiting for 180s
08:29:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:29:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:29:55 [Stdalone] No response to the heartbeat: Reason = -1
08:29:55 [Stdalone] Reconnection attempts: : 3
08:29:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
08:29:55 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Defense FlexLM server does not respond to checkout requests
08:29:55 ------ Feature: K00006243 - End of KEEPALIVE ----
08:29:55 [Stdalone] Period attempt - Waiting for 180s
08:32:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:32:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:32:55 [Stdalone] No response to the heartbeat: Reason = -1
08:32:55 [Stdalone] Reconnection attempts: : 4
08:32:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
Can anybody suggest me what I should do or check ?
Grzegorz
CS - Virtualized (VMware 5.5) main IP 192.168.7.80
FlexLM - Virtualized (VMware 5.5) IP: 192.168.7.63
OXE shelf with GD3, PCS and line boards
In the future I will want to install OT on Virtual machine too.
I have OXE in version R11.2 29b
The main problem is no communication between CS and FlexLM. System works about 5 hours and then rise Panic Flex flag to 1.
I have configured FlexLM parameters on CS like below:
┌─Review/Modify: Licenses────────────────────────────────┐
│ │
│ Node Number (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Instance (reserved) : 1 │
│ │
│ FlexLM Licensing Enabled + YES │
│ Flex Server IP Address : 192.168.7.63 │
│ Flex Server Port : 27000 │
│ Flex Server 2 IP Address : 00.00.00.00 │
│ Flex Server 2 Port : 0 │
│ ProductID discovery + YES │
│ Use Flex License + NO │
│ │
└────────────────────────────────────────────────────────┘
I attached the dongle to FlexLM and copied my .ice file to /opt/Alcatel-Lucent/data/licenses. Then I restarted the server.
Ping works OK in both directions, but after "incvisu" command on CS I see problems with communication like below:
21/12/16 08:26:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:29:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:32:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:35:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
21/12/16 08:38:55 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15
etc.
Below a part of my flexlmtrace from CS:
08:20:17 Begin MAIN ...
08:20:17 CPU role is main
08:20:17 Flexagent is starting ...
08:20:17 Load of licenses configuration...
08:20:17 Load of license RSI-5 version=1.0
08:20:17 Init License ...
08:20:17 License not enabled. No checkout done ...
08:20:17 End of load of licenses configuration...
08:20:17 MAO Listener: init port ...
08:20:17 MAO Listener: init port OK
08:20:17 Call handling IPC listener starting ...
08:20:17 MAO Listener: waiting for CH request ...
08:20:53 Flex enabled : 1
08:20:53 Flex Product Id : 1
08:20:53 Flex Use License : 0
08:20:53 PanicFlag : 0
08:20:53 PanicFlex : 0
08:20:53 MAO Listener: Request received from CH ...
08:20:53 Creating a LICENSE CREATION request...
08:20:53 FlexLicenseCreationRequest: Feature Name : K00006243
08:20:53 FlexLicenseCreationRequest: Number Of Licenses: 1
08:20:53 Processing the request...
08:20:53 27000 192.168.7.63 0 00.00.00.00 K00006243 1.0 1
08:20:53 Init License ...
08:20:53 Init of connection to FlexLM Server ...
08:20:53 x_flexlm_newid_job
08:20:53 [Stdalone] Connection to 27000@192.168.7.63 initialized
08:20:53 Init License OK. Checkout ...
08:20:53 [Stdalone] Defense thread starting ...
08:20:53 [Stdalone] Checkout Not OK !! Reason = : -15
08:20:53 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com". Checkout
08:20:53 handleCHRequest : deleting request...
08:20:55 [Stdalone] Period attempt - Waiting for 180s
08:23:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:23:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:23:55 [Stdalone] No response to the heartbeat: Reason = -1
08:23:55 [Stdalone] Reconnection attempts: : 1
08:23:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
08:23:55 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Defense FlexLM server does not respond to checkout requests
08:23:55 ------ Feature: K00006243 - End of KEEPALIVE ----
08:23:55 [Stdalone] Period attempt - Waiting for 180s
08:26:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:26:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:26:55 [Stdalone] No response to the heartbeat: Reason = -1
08:26:55 [Stdalone] Reconnection attempts: : 2
08:26:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
08:26:55 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Defense FlexLM server does not respond to checkout requests
08:26:55 ------ Feature: K00006243 - End of KEEPALIVE ----
08:26:55 [Stdalone] Period attempt - Waiting for 180s
08:29:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:29:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:29:55 [Stdalone] No response to the heartbeat: Reason = -1
08:29:55 [Stdalone] Reconnection attempts: : 3
08:29:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
08:29:55 FlexLM (192.168.7.63-27000) Error: FLEX_SERVER_LINK 1 -15 Defense FlexLM server does not respond to checkout requests
08:29:55 ------ Feature: K00006243 - End of KEEPALIVE ----
08:29:55 [Stdalone] Period attempt - Waiting for 180s
08:32:55 ------ Feature: K00006243 - KEEPALIVE -----------
08:32:55 [Stdalone] Checkout Not OK !! Reason = : -15
08:32:55 [Stdalone] No response to the heartbeat: Reason = -1
08:32:55 [Stdalone] Reconnection attempts: : 4
08:32:55 Cannot connect to license server
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: K00006243
Server name: 192.168.7.63
License path: 27000@192.168.7.63
FLEXlm error: -15,570. System Error: 111 "Connection refused"
Can anybody suggest me what I should do or check ?
Grzegorz