Alcatel Unleashed

Scenario:

I have 1 core switch 6900-x20 and have 6450 5Nos switches stacked each other

there is one up link going to edge switch of 1 in a stack

i can able to ping my core switch from stack 1 but i was not able to reach the core switch from remaining stacks??


What could be the issue?

No need to flood the Forum with lots of the same posts.
Do you stack or daisy chain (you use stacking module?)
If you can reach the core from a PC connected to Port 1/X you will be able to reach the core from a PC connected to a port in 3/X if you have the same same VLAN on 3/X an 1/X

i was not able to understand your strange posts in the 6900 board, but i guess you lack some knowledge about routing and vlans

devnull wrote: ↑10 Feb 2017 09:14 No need to flood the Forum with lots of the same posts.
Do you stack or daisy chain (you use stacking module?)
If you can reach the core from a PC connected to Port 1/X you will be able to reach the core from a PC connected to a port in 3/X if you have the same same VLAN on 3/X an 1/X

i was not able to understand your strange posts in the 6900 board, but i guess you lack some knowledge about routing and vlans

See Mr.Devnull,

This is my first Hotel data project i know about voice but i dont have exp in data see what customer needs

Just need to have different vlans for all the switches because they need one vlan for Access points
one for IPTV and multiple vlans for Data switch(Floor wise ) and there will be only one uplink from core switch for all (Data,AP& IPTV)

Just to ensure that by connecting my laptop in each switch and just try to ping the core switch and if it is ok then we can conclude ok the configuration is correct

Thats why i testing from each switch i can able to reach core switch or we have to test only in 1 switch of the stack is that necessary ???


Please i think you got understand

Yes i using stacking
stack a -switch1 to stack b switch 2 -----Access points-------UP LINK FROM CORE SWITCH connected here only
stack b -switch 2 to stack b switch 3 -----DATA
stack a -switch 3 to stack b switch 4------IPTV
stack a -switch 4 to stack b switch 5-------Access points
stack a -switch 5 to stack b switch 1--------DATA & IPTV

Now i can able to reach core switch from my PC by connecting to the edge switch 1 and not able to reach core switch by connecting to other edge switches(2,3,4,5).

Configuration in core switch:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.02.07 09:37:45 =~=~=~=~=~=~=~=~=~=~=~=


(none) login:

(none) login:

(none) login:

(none) login: admin
Password:


Wed Feb 8 06:34:43 : AAA Switch-Warning warning message:

+++ WARNING! Switch Access Vulnerability.

+++ WARNING! Admin user authentication using default password.

Welcome to the Alcatel-Lucent Enterprise OS6900-X20 8.3.1.160.R02 GA, December 22, 2016.

Copyright (c) 1994-2014 Alcatel-Lucent. All Rights Reserved.
Copyright (c) 2014-2016 Alcatel-Lucent Enterprise. All Rights Reserved.

OmniSwitch(tm) is a trademark of Alcatel-Lucent,
registered in the United States Patent and Trademark Office.

->
->
->
-> show vlan members port embers
vlan port type status
--------+------------+------------+--------------
1 1/1/1 default forwarding
1 1/1/2 default forwarding
1 1/1/3 default forwarding
1 1/1/4 default forwarding
1 1/1/5 default forwarding
1 1/1/6 default inactive
1 1/1/7 default inactive
1 1/1/8 default inactive
1 1/1/9 default inactive
1 1/1/10 default inactive
1 1/1/11 default inactive
1 1/1/12 default inactive
1 1/1/14 default inactive
1 1/1/15 default inactive
1 1/1/16 default inactive
1 1/1/17 default inactive
1 1/1/18 default inactive
1 2/1/1 default inactive
1 2/1/2 default inactive
1 2/1/3 default inactive
1 2/1/4 default inactive
1 2/1/5 default inactive
1 2/1/6 default inactive
1 2/1/7 default inactive
1 2/1/8 default inactive
1 2/1/9 default inactive
1 2/1/10 default inactive
1 2/1/11 default inactive
1 2/1/12 default inactive
1 2/1/13 default forwarding
1 2/1/14 default inactive
1 2/1/15 default inactive
1 2/1/16 default inactive
1 2/1/17 default inactive
1 2/1/18 default inactive
90 1/1/13 default forwarding

-> show v
verbose vm-snooping
violation vrf
violation-recovery-configuration vrf-profiles
virtual-chassis vrrp
vlan vrrp3
-> show vlan
vlan type admin oper ip mtu name
------+-------+-------+------+------+------+------------------
1 std Ena Ena Dis 1500 VLAN 1
10 std Ena Dis Dis 1500 VLAN 10
90 std Ena Ena Ena 1500 VLAN 90
4094 vcm Ena Ena Dis 1500 VCM IPC

-> show ip interface b
Total 7 interfaces
Flags (D=Directly-bound)

Name IP Address Subnet Mask Status Forward Device Flags
--------------------------------+---------------+---------------+------+-------+---------+------
EMP-CHAS1 192.168.10.1 255.0.0.0 DOWN NO EMP
EMP-CMMA-CHAS1 0.0.0.0 0.0.0.0 DOWN NO EMP
EMP-CMMA-CHAS2 0.0.0.0 0.0.0.0 DOWN NO EMP
Loopback 127.0.0.1 255.255.255.255 UP NO Loopback
dhcp-client 0.0.0.0 0.0.0.0 DOWN NO unbound
int-50 0.0.0.0 0.0.0.0 DOWN NO unbound
vlan-90 10.200.200.1 255.255.248.0 UP YES vlan 90


Configuration in edge switch-1:

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.02.07 10:28:12 =~=~=~=~=~=~=~=~=~=~=~=

login : admin
password :

Welcome to the Alcatel-Lucent OmniSwitch 6450
Software Version 6.6.5.63.R02 GA, December 16, 2014.

Copyright(c), 1994-2014 Alcatel-Lucent. All Rights reserved.

OmniSwitch(TM) is a trademark of Alcatel-Lucent registered
in the United States Patent and Trademark Office.


-> show vlan port
vlan port type status
------+-------+---------+-------------
1 1/50 default inactive
1 2/49 default inactive
1 2/50 default inactive
1 3/50 default inactive
1 4/3 default inactive
1 4/4 default inactive
1 4/5 default inactive
1 4/6 default inactive
1 4/7 default inactive
1 4/8 default inactive
1 4/9 default inactive
1 4/10 default inactive
1 4/11 default inactive
1 4/12 default inactive
1 4/13 default inactive
1 4/14 default inactive
1 4/15 default inactive
1 4/16 default inactive
1 4/17 default inactive
1 4/18 default inactive
1 4/19 default inactive
1 4/20 default inactive
1 4/21 default inactive
1 4/22 default inactive
1 4/23 default inactive
1 4/24 default inactive
1 4/25 default inactive
1 4/26 default inactive
1 5/3 default inactive
1 5/4 default inactive
1 5/9 default inactive
1 5/10 default inactive
1 5/11 default inactive
1 5/12 default inactive
1 5/13 default inactive
1 5/14 default inactive
1 5/15 default inactive
1 5/16 default inactive
1 5/17 default inactive
1 5/18 default inactive
1 5/19 default inactive
1 5/20 default inactive
1 5/21 default inactive
1 5/22 default inactive
1 5/23 default inactive
1 5/24 default inactive
1 5/25 default inactive
1 5/26 default inactive
112 1/1 default forwarding
112 1/2 default inactive
112 1/3 default forwarding
112 1/4 default inactive
112 1/5 default forwarding
112 1/6 default inactive
112 1/7 default forwarding
112 1/8 default inactive
112 1/9 default forwarding
112 1/10 default inactive
112 1/11 default forwarding
112 1/12 default inactive
112 1/13 default forwarding
112 1/14 default inactive
112 1/15 default forwarding
112 1/16 default inactive
112 1/17 default forwarding
112 1/18 default inactive
112 1/19 default forwarding
112 1/20 default inactive
112 1/21 default forwarding
112 1/22 default inactive
112 1/23 default forwarding
112 1/24 default inactive
112 1/25 default forwarding
112 1/26 default forwarding
112 1/27 default forwarding
112 1/28 default inactive
112 1/29 default forwarding
112 1/30 default inactive
112 1/31 default forwarding
112 1/32 default inactive
112 1/33 default forwarding
112 1/34 default inactive
112 1/35 default forwarding
112 1/36 default inactive
112 1/37 default forwarding
112 1/38 default inactive
112 1/39 default forwarding
112 1/40 default inactive
112 1/41 default forwarding
112 1/42 default forwarding
112 1/43 default inactive
112 1/44 default forwarding
112 1/45 default forwarding
112 1/46 default inactive
112 1/47 default forwarding
112 1/48 default inactive
112 1/49 default forwarding
112 4/1 default forwarding
112 4/2 default forwarding
1112 3/1 default inactive
1112 3/2 default inactive
1112 3/3 default inactive
1112 3/4 default inactive
1112 3/5 default inactive
1112 3/6 default inactive
1112 3/7 default inactive
1112 3/8 default inactive
1112 3/9 default inactive
1112 3/10 default inactive
1112 3/11 default inactive
1112 3/12 default inactive
1112 3/13 default inactive
1112 3/14 default inactive
1112 3/15 default inactive
1112 3/16 default inactive
1112 3/17 default inactive
1112 3/18 default inactive
1112 3/19 default inactive
1112 3/20 default inactive
1112 3/21 default inactive
1112 3/22 default inactive
1112 3/23 default inactive
1112 3/24 default inactive
1112 3/25 default inactive
1112 3/26 default inactive
1112 3/27 default inactive
1112 3/28 default inactive
1112 3/29 default inactive
1112 3/30 default inactive
1112 3/31 default inactive
1112 3/32 default inactive
1112 3/33 default inactive
1112 3/34 default inactive
1112 3/35 default inactive
1112 3/36 default inactive
1112 3/37 default inactive
1112 3/38 default inactive
1112 3/39 default inactive
1112 3/40 default inactive
1112 3/41 default inactive
1112 3/42 default inactive
1112 3/43 default inactive
1112 3/44 default inactive
1112 3/45 default inactive
1112 3/46 default inactive
1112 3/47 default inactive
1112 3/48 default inactive
1112 3/49 default inactive
1112 5/5 default inactive
1112 5/6 default inactive
1112 5/7 default inactive
1112 5/8 default inactive
2047 2/48 default inactive
2201 2/1 default inactive
2202 2/2 default inactive
2203 2/3 default inactive
2204 2/4 default inactive
2205 2/5 default inactive
2206 2/6 default inactive
2207 2/7 default inactive
2208 2/8 default inactive
2209 2/9 default inactive
2210 2/10 default inactive
2211 2/11 default inactive
2212 2/12 default inactive
2213 2/13 default inactive
2214 2/14 default inactive
2215 2/15 default inactive
2216 2/16 default inactive
2217 2/17 default inactive
2218 2/18 default inactive
2219 2/19 default inactive
2220 2/20 default inactive
2221 2/21 default inactive
2222 2/22 default inactive
2223 2/23 default inactive
2224 2/24 default inactive
2225 2/25 default inactive
2226 2/26 default inactive
2227 2/27 default inactive
2228 2/28 default inactive
2229 2/29 default inactive
2230 2/30 default inactive
2231 2/31 default inactive
2232 2/32 default inactive
2233 2/33 default inactive
2234 2/34 default inactive
2235 2/35 default inactive
2236 2/36 default inactive
2237 2/37 default inactive
2238 2/38 default inactive
2239 2/39 default inactive
2240 2/40 default inactive
2241 2/41 default inactive
2242 2/42 default inactive
2243 2/43 default inactive
2244 2/44 default inactive
2245 2/45 default inactive
2246 2/46 default inactive
2247 2/47 default inactive
2248 5/1 default inactive
2249 5/2 default inactive

-> show v
-> show vl
-> show vlan
stree mble src
vlan type admin oper 1x1 flat auth ip tag lrn name
-----+-----+------+------+------+------+----+-----+-----+------+----------
1 std on off on on off off off on wireless
112 std on on on on off off off on AP-2NDFLR
1112 std on off on on off off off on IPTV-2NDFLOOR
2047 std on off on on off off off on R-2047
2201 std on off on on off off off on R-201
2202 std on off on on off off off on R-202
2203 std on off on on off off off on R-203
2204 std on off on on off off off on R-204
2205 std on off on on off off off on R-205
2206 std on off on on off off off on R-206
2207 std on off on on off off off on R-207
2208 std on off on on off off off on R-208
2209 std on off on on off off off on R-209
2210 std on off on on off off off on R-210
2211 std on off on on off off off on R-211
2212 std on off on on off off off on R-212
2213 std on off on on off off off on R-213
2214 std on off on on off off off on R-214
2215 std on off on on off off off on R-215
2216 std on off on on off off off on R-216
2217 std on off on on off off off on R-217
2218 std on off on on off off off on R-218
2219 std on off on on off off off on R-219
2220 std on off on on off off off on R-220
2221 std on off on on off off off on R-221
2222 std on off on on off off off on R-222
2223 std on off on on off off off on R-223
2224 std on off on on off off off on R-224
2225 std on off on on off off off on R-225
2226 std on off on on off off off on R-226
2227 std on off on on off off off on R-227
2228 std on off on on off off off on R-228
2229 std on off on on off off off on R-229
2230 std on off on on off off off on R-230
2231 std on off on on off off off on R-231
2232 std on off on on off off off on R-232
2233 std on off on on off off off on R-233
2234 std on off on on off off off on R-234
2235 std on off on on off off off on R-235
2236 std on off on on off off off on R-236
2237 std on off on on off off off on R-237
2238 std on off on on off off off on R-238
2239 std on off on on off off off on R-239
2240 std on off on on off off off on R-240
2241 std on off on on off off off on R-241
2242 std on off on on off off off on R-242
2243 std on off on on off off off on R-243
2244 std on off on on off off off on R-244
2245 std on off on on off off off on R-245
2246 std on off on on off off off on R-246
2247 std on off on on off off off on R-247
2248 std on off on on off off off on R-248
2249 std on off on on off off off on R-249

-> show ip interface
Total 2 interfaces
Name IP Address Subnet Mask Status Forward Device
--------------------------------+---------------+---------------+------+-------+--------
1 0.0.0.0 0.0.0.0 DOWN NO unbound
Loopback 127.0.0.1 255.0.0.0 UP NO Loopback



Give me the reason

HUSSAINQCS wrote: ↑10 Feb 2017 09:36 Give me the reason

I wonder that you reach anything when connection to "Edge-1" You are on Slot 1 in VLAN 112 and you do not have a gateway for VL 112. Only thing i can imagine is that you connected VL90 to Vl122 and connected a PC with an IP 10.200.200.x/21

-> This is not a good solution

I would guess you do not need a distinct VLAN for each accesspoint, but if you stress that you need to have a gateway/Firewall/.. Interface for each of that vlans to have a connectivity to outside world. this can be the X20 or the wlan controller.

I guess you should get some data expert to figure out, what you really need - the forum seems not be appropriate for that.