IP phones not connecting with Cal server OXE when connected behind AP 205

[mustafa.ahmad]

HI

When we connect the IP phone behind the AP 205 , the ip phones keep rebooting ? cannot connect with CS - OXE

[Konstantinos.E]

Hello sir,

with this details you give us is imposible to guide you how to solve your problem.
Is like you say my car doesn't work .

Please explain your problem .

[mustafa.ahmad]

When i connect directly the IP phone to the switch it is getting connected to OXE , the port is mobile vlan tagged .

the ip phones and the CS are in vlan 4 , i have enabled the MAC address identification for tagging of vlan.

the APs are in the vlan 1 , they are getting controlled by the WLAN controller .

[mustafa.ahmad]

When i connect directly the IP phone to the switch it is getting connected to OXE , the port is mobile vlan tagged .

the ip phones and the CS are in vlan 4 , i have enabled the MAC address identification for tagging of vlan.

the APs are in the vlan 1 , they are getting controlled by the WLAN controller .

[Konstantinos.E]

I suppose you have a wireless phone like 8118 or 8128 and you are trying to connect it with oxe behind ap 205 ?
Is that correct?

[mustafa.ahmad]

Nopes, it was an IP phone connected using CAT6 directly to the AP point.

Anyhow, the problem was resolved after enabling POE on AP from the WLAN controller.